KSZ8851-16MLLI vs KSZ8851-16MLLJ So sánh
So sánh chi tiết song song của KSZ8851-16MLLI bằng Microchip Technology và KSZ8851-16MLLJ bằng Microchip Technology. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Microchip Technology
KSZ8851-16MLLI - 10/100 Ethernet Controller | Microchip Technology
KSZ8851-16MLLI ✓ Hoạt độngMicrochip Technology
KSZ8851-16MLLJ - 10/100 Ethernet Controller | Microchip
KSZ8851-16MLLJ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | KSZ8851-16MLLI | KSZ8851-16MLLJ |
|---|---|---|
| Thương hiệu | Microchip Technology | Microchip Technology |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Device Type | Single-port Ethernet MAC controller with integrated 10/100 Base-T/TX PHY | Single-port Ethernet MAC controller with integrated PHY |
| Ethernet Speed | 10 Mbps to 100 Mbps | 10/100 Mb/s |
| Host Interface | 8-bit or 16-bit generic non-PCI CPU interface | 8-bit or 16-bit generic non-PCI parallel interface |
| MAC Address Support | [DATA_NEEDED: MAC address configuration and table size] | — |
| Điện áp cung cấp | 3.3 V | [DATA_NEEDED: core and I/O supply voltage ranges] |
| Core I/O Supply Voltage | [DATA_NEEDED: core I/O supply voltage] | — |
| Hộp | 48-LQFP, 7 x 7 mm | 48-LQFP (7 mm x 7 mm) |
| Số chân | 48 pins | — |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Temperature Grade | Industrial grade | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| Ethernet Compliance | IEEE 802.3 | — |
| Physical Layer | 10/100 Base-T/TX PHY | 10/100 Base-T/TX PHY |
| Number of Ethernet Ports | 1 port | — |
| Host Bus Type | Generic non-PCI CPU interface | — |
| Package Side | [DATA_NEEDED: package height and body dimensions] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | Not qualified; automotive qualification is identified for the KSZ8851-16MLLU | not_applicable |
| Clock Requirement | [DATA_NEEDED: external clock and crystal requirements] | — |
| Reset Interface | [DATA_NEEDED: reset polarity and timing] | — |
| Memory Interface | — | Dynamic memory pointer |
| Lead-Free Package Option | — | 48-pin lead-free LQFP |
| Nhiệt độ hoạt động | — | -40°C to +125°C |
| Maximum Supply Voltage | — | [DATA_NEEDED: absolute maximum supply voltage] |
| Interface Supply Voltage | — | [DATA_NEEDED: supported 1.8 V, 2.5 V, and 3.3 V interface configurations] |
| Ethernet Media Support | — | [DATA_NEEDED: supported cable length and media types] |
| Transmit and Receive FIFO | — | [DATA_NEEDED: transmit and receive FIFO sizes] |
| Tần số xung maksimum | — | [DATA_NEEDED: maximum host interface clock frequency] |
| Termination and Pin Configuration | — | [DATA_NEEDED: 48-pin pin names, signal types, and no-connect assignments] |