KSZ9131RNXC vs KSZ9131RNXI So sánh

So sánh chi tiết song song của KSZ9131RNXC bằng Microchip Technology và KSZ9131RNXI bằng Microchip Technology. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Microchip Technology
KSZ9131RNXC KSZ9131RNXC - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 (Tape & Reel)

KSZ9131RNXC - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48 (Tape & Reel)

KSZ9131RNXC ✓ Hoạt động
Microchip Technology
KSZ9131RNXI KSZ9131RNXI - Gigabit Ethernet Transceiver | Microchip

KSZ9131RNXI - Gigabit Ethernet Transceiver | Microchip

KSZ9131RNXI ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số KSZ9131RNXC KSZ9131RNXI
Thương hiệu Microchip Technology Microchip Technology
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Ethernet PHY Transceiver —
Tốc độ dữ liệu 10/100/1000 Mbps (Triple-Speed) —
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3az —
MAC Interface RGMII / GMII / MII —
Media Interface Twisted Pair (CAT-5/5e/6 UTP) —
Điện áp cung cấp 3.3 V (single supply, internal 1.2 V LDO) —
Typical Power Consumption 600 mW (1000Base-T link) —
Hộp 48-pin QFN (7x7 mm) 48-QFN (7 x 7 mm)
Khoảng nhiệt độ hoạt động -40 C to +85 C (industrial) —
Auto-Negotiation Yes (IEEE 802.3 Clause 28) 10/100/1000 Mbps and half/full duplex
Auto-MDI/MDIX Yes (HP Auto-MDIX, all speeds) —
Energy Efficient Ethernet Yes (IEEE 802.3az) —
Cable Diagnostics LinkMD cable fault detection —
Wake-on-LAN Supported Supported with custom-packet detection
Number of Transceivers 1 —
AEC-Q100 Qualification Yes (automotive grade) —
Kiểu lắp đặt Surface Mount Surface mount
Trạng thái RoHS Compliant —
Ethernet Data Rate — 10/100/1000 Mbps
Duplex Support — Half-duplex and full-duplex
Ethernet Compliance — IEEE 802.3 compliant
Host Interface — GMII/MII/RGMII
I/O Voltage Tolerance — 3.3 V, 2.5 V, and 1.8 V
Primary Supply — 3.3 V
Reference Clock Output — 125 MHz
RGMII Clock Frequency — 125 MHz
RGMII Clock Period — 8 ns
Differential Pair Termination — On-chip resistors
Power Architecture — Single 3.3 V operation with one external FET
LED Functions — Programmable link, activity, and speed outputs
Low-Power Mode — Energy-detect power-down
Cable Diagnostic — LinkMD TDR-based diagnostic
Baseline Wander — Correction supported
Nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá