LM224KN vs LM224KAN So sánh

So sánh chi tiết song song của LM224KN bằng Texas Instruments và LM224KAN bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
LM224KN LM224KN - Quad 1.2 MHz Op Amp, 14-DIP | Texas Instruments

LM224KN - Quad 1.2 MHz Op Amp, 14-DIP | Texas Instruments

LM224KN ✓ Hoạt động
Texas Instruments
LM224KAN LM224KAN - Quad Operational Amplifier | Texas Instruments

LM224KAN - Quad Operational Amplifier | Texas Instruments

LM224KAN ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số LM224KN LM224KAN
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Number of Amplifiers 4 4
Number of Circuits 4 circuits —
Amplifier Type General-purpose operational amplifier —
Gain-Bandwidth Product 1.2 MHz —
Single Supply Voltage Range 3 V to 32 V —
Input Offset Voltage 600 uV typical ±1.5 mV
Supply Current Drain 0.8 mA typical —
Common-Mode Input Voltage Range Includes ground —
Differential Input Voltage High differential input voltage capability; exact limit [DATA_NEEDED: differential input voltage limit] —
ESD Protection 2 kV 2 kV
Temperature Grade Industrial grade —
Hộp 14-pin DIP (0.300 in, 7.62 mm) 14-pin PDIP, 0.300 in, 7.62 mm pitch
Kiểu lắp đặt Through-hole —
Lead Pitch 7.62 mm (0.300 in) —
Supply Configuration Single supply or split supply —
Output Current [DATA_NEEDED: output current specification] —
Input Bias Current [DATA_NEEDED: input bias current specification] 20 nA
Slew Rate [DATA_NEEDED: slew rate specification] —
Open-Loop Gain [DATA_NEEDED: open-loop gain specification] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -25 °C to 85 °C
RoHS Compliance unknown —
Automotive Qualification Not qualified; AEC-Q100 status [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Quad operational amplifier
Amplifier Configuration — Standard general-purpose amplifier
Supply Type — Single supply or split supply
Voltage Gain — 70 dB
Điện áp yên tĩnh — 0.3 µA per channel
Supply Voltage Range — 3 V to 32 V
Khoảng điện áp đầu ra — ±1.5 V to 16 V
Output Current Per Channel — 60 mA
Common-Mode Rejection Ratio — 70 dB
Số lượng chân — 14
Trạng thái RoHS — unknown
REACH Status — unknown
Lead-Free Status — unknown

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá