LM2903EPWRQ1 vs LM2903VQPWRQ1 So sánh

So sánh chi tiết song song của LM2903EPWRQ1 bằng Texas Instruments và LM2903VQPWRQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
LM2903EPWRQ1 LM2903EPWRQ1 - Automotive Dual Comparator | Texas Instruments

LM2903EPWRQ1 - Automotive Dual Comparator | Texas Instruments

LM2903EPWRQ1 ✓ Hoạt động
Texas Instruments
LM2903VQPWRQ1 LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments

LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments

LM2903VQPWRQ1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số LM2903EPWRQ1 LM2903VQPWRQ1
Thương hiệu Texas Instruments Texas Instruments
Danh mục Logic ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Comparator Type Dual differential comparator Dual general-purpose differential comparator
Number of Channels 2 channels 2 channels
Kiểu đầu ra Open-collector Open-collector
Supply Voltage Range 2 V to 30 V —
Maximum Supply Voltage 30 V —
Propagation Delay 1.3 us maximum [DATA_NEEDED: propagation delay]
Automotive Qualification AEC-Q100 Grade 0 and Grade 1 AEC-Q100 Grade 0 and Grade 1
Khoảng nhiệt độ hoạt động -40 C to +150 C [DATA_NEEDED: operating temperature range by grade]
Hộp 8-pin TSSOP (PW) 8-pin TSSOP
Kiểu lắp đặt Surface mount Surface mount
Số chân 8 pins —
Input Configuration Differential inputs, one inverting and one non-inverting input per channel —
Input Bias Current 0.5 nA typical [DATA_NEEDED: input bias current]
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Input Common-Mode Voltage Range [DATA_NEEDED: input common-mode voltage range] —
Output Current [DATA_NEEDED: output current] —
Điện áp yên tĩnh [DATA_NEEDED: quiescent current] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Supply Configuration — Single supply or dual supplies
Dual-Supply Total Voltage Range — 2 V to 36 V
Minimum VCC Margin — At least 1.5 V above the lower supply
Supply Current Drain — 0.4 mA typical per comparator
Common-Mode Input Range — Rail-to-rail
ESD Rating — 2 kV
Differential Input Voltage — [DATA_NEEDED: differential input voltage range]
Output Sink Current — [DATA_NEEDED: output sink current]
RoHS Compliance — [DATA_NEEDED: RoHS compliance statement]
REACH Compliance — [DATA_NEEDED: REACH compliance statement]
Shipping Format — Tape and reel

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá