LM2903M8-13 vs LM2903QM8-13 So sánh
So sánh chi tiết song song của LM2903M8-13 bằng Diodes Incorporated và LM2903QM8-13 bằng Diodes Incorporated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | LM2903M8-13 | LM2903QM8-13 |
|---|---|---|
| Thương hiệu | Diodes Incorporated | Diodes Incorporated |
| Danh mục | Logic ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential voltage comparator | General-purpose differential voltage comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | Up to 36 V | — |
| Single Supply Operation | Supported | — |
| Split Supply Operation | Supported | — |
| Propagation Delay | 300 ns | — |
| Kiểu đầu ra | Open-collector | — |
| Logic Compatibility | TTL, CMOS, and MOS output compatible | — |
| Input Offset Voltage | Very low; exact value [DATA_NEEDED: input offset voltage] | 2 mV |
| Điện áp cung cấp | Low and independent of input voltage; exact value [DATA_NEEDED: supply current] | 0.6 mA |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | Equal to the power-supply voltage |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Hộp | 8-pin MSOP | 8-MSOP |
| Package Dimensions | [DATA_NEEDED: package dimensions] | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Shipping Format | Tape and reel | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Supply Voltage | — | 36 V |
| Input Bias Current | — | 25 nA |
| Output Leakage Current | — | 5 nA |
| Output Saturation Voltage | — | 200 mV at 4 mA |
| Common-Mode Input Voltage Range | — | Includes ground |
| Output Compatibility | — | TTL, MOS, and CMOS compatible |
| Automotive Grade | — | AEC-Q100 Grade 1 qualified |
| Lead-Free Construction | — | Yes |
| Halogen and Antimony | — | Free |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended output pull-up resistor value] |
| Comparator Propagation Delay | — | [DATA_NEEDED: propagation delay] |