LM2904AYDT vs LM2904DG4 So sánh
So sánh chi tiết song song của LM2904AYDT bằng STMicroelectronics và LM2904DG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | LM2904AYDT | LM2904DG4 |
|---|---|---|
| Thương hiệu | STMicroelectronics | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Number of Amplifiers | 2 circuits | — |
| Amplifier Type | General-purpose operational amplifier | General Purpose |
| Channel Configuration | 2 independent channels | — |
| Gain-Bandwidth Product | 1.1 MHz | 700 kHz |
| Slew Rate | 0.6 V/us | 0.3 V/µs |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Supply Type | Single positive supply | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Frequency Compensation | Internal | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Hộp | 8-pin SOIC | 8-SOIC (0.154, 3.90 mm width) |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Trạng thái RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | Lead-free | — |
| Moisture Sensitivity Level | MSL 1 (unlimited) | — |
| Reel Quantity | 2500 units | — |
| Manufacturer | STMicroelectronics | — |
| Number of Circuits | — | 2 |
| Maximum Supply Voltage | — | 26 V |
| Single-Supply Operation | — | Up to 26 V |
| Dual-Supply Operation | — | Up to ±13 V |
| Supply-Current Drain | — | 0.7 mA typical |
| Supply-Current Independence | — | Independent of supply voltage |
| Common-Mode Input Range | — | Includes ground |
| Packaging | — | Tube |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Open-Loop Voltage Gain | — | [DATA_NEEDED: open-loop voltage gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |