LM2904AYDT vs MC33072PG So sánh
So sánh chi tiết song song của LM2904AYDT bằng STMicroelectronics và MC33072PG bằng onsemi. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | LM2904AYDT | MC33072PG |
|---|---|---|
| Thương hiệu | STMicroelectronics | onsemi |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Number of Amplifiers | 2 circuits | 2 circuits |
| Amplifier Type | General-purpose operational amplifier | General-purpose operational amplifier |
| Channel Configuration | 2 independent channels | — |
| Gain-Bandwidth Product | 1.1 MHz | 4.5 MHz |
| Slew Rate | 0.6 V/us | 13 V/us |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Supply Type | Single positive supply | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3.0 V to 44 V |
| Frequency Compensation | Internal | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Hộp | 8-pin SOIC | 8-PDIP, 0.300 inch (7.62 mm) pitch |
| Kiểu lắp đặt | Surface mount | Through-hole |
| Automotive Qualification | AEC-Q100 | — |
| Trạng thái RoHS | Compliant | RoHS-compliant and lead-free |
| Lead-Free Status | Lead-free | — |
| Moisture Sensitivity Level | MSL 1 (unlimited) | — |
| Reel Quantity | 2500 units | — |
| Manufacturer | STMicroelectronics | — |
| Architecture | — | Voltage-feedback dual amplifier |
| Semiconductor Technology | — | Bipolar |
| Single-Supply Operation | — | Supported |
| Split-Supply Operation | — | Supported |
| Input Offset Voltage | — | 5 mV maximum |
| Common-Mode Rejection Ratio | — | 97 dB nominal |
| Packaging | — | Tube |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |