LM393APWR vs LM2903QPWRQ1 So sánh
So sánh chi tiết song song của LM393APWR bằng Texas Instruments và LM2903QPWRQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM2903QPWRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QPWRQ1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM393APWR | LM2903QPWRQ1 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Kiểu đầu ra | Open collector | Open-collector, rail-to-rail |
| Number of Channels | 2 channels | 2 channels |
| Maximum Supply Voltage | 38 V | 36 V |
| Common-Mode Input Range | Includes ground; rail-to-rail input | — |
| Input Offset Voltage | 0.37 mV | — |
| Input Bias Current | 3.5 nA | 25 nA typical |
| Điện áp cung cấp | 200 µA per comparator | 0.4 mA typical per comparator |
| ESD Rating | 2 kV HBM | — |
| Response Time | [DATA_NEEDED: response time] | — |
| Output Compatibility | TTL, MOS, and CMOS | — |
| Grade | Precision A grade | — |
| Temperature Grade | Industrial grade | — |
| Hộp | 8-pin TSSOP (PW) | TSSOP (PW), 8 pins |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Differential Input Voltage Range | ±38 V maximum supply-rated range | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Configuration | — | Single or dual supply |
| Input Offset Current | — | 3 nA typical |
| Automotive Qualification | — | AEC-Q100 Grade 0 and Grade 1 |
| Khoảng nhiệt độ hoạt động | — | -40°C to 125°C |
| Supply Current Drain | — | Independent of supply voltage |
| ESD Performance | — | 2 kV HBM for the LM2903B-Q1 family |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict Minerals Status | — | [DATA_NEEDED: conflict minerals status] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended output pull-up resistor] |