MAX1154AEUE+T vs MAX1177CEUP+T So sánh

So sánh chi tiết song song của MAX1154AEUE+T bằng Maxim Integrated và MAX1177CEUP+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Maxim Integrated
MAX1154AEUE+T MAX1154AEUE+T - 10-Ch 10-Bit System Monitor ADC | Maxim Integrated

MAX1154AEUE+T - 10-Ch 10-Bit System Monitor ADC | Maxim Integrated

MAX1154AEUE+T ✓ Hoạt động
Analog Devices
MAX1177CEUP+T MAX1177CEUP+T - 16-Bit 135ksps SAR ADC | Maxim | 20-TSSOP

MAX1177CEUP+T - 16-Bit 135ksps SAR ADC | Maxim | 20-TSSOP

MAX1177CEUP+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX1154AEUE+T MAX1177CEUP+T
Thương hiệu Maxim Integrated Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng 10-bit system-monitor ADC with internal temperature sensor and VDD monitor —
Number of Channels 10 (8 external analog + 2 internal: temperature, VDD) 1 single-ended / 1 pseudo-differential
Độ phân giải 10 bit 16 bits
Tỷ lệ lấy mẫu 94 ksps (auto mode, single channel) —
Analog Supply Voltage 2.7 V to 5.25 V +4.75 V to +5.25 V (5 V nominal)
Analog Input Range 0 V to VREF (single-ended) —
Internal Reference Voltage 2.5 V (typ) —
Điện áp cung cấp 1.7 mA at 3 V (94 ksps, single channel); 190 uA at 2 ksps; < 8 uA at 50 sps (AutoShutdown) —
Operating Power 5 mW at 3 V / 94 ksps —
Digital Interface SPI / QSPI / MICROWIRE-compatible serial Byte-wide parallel (8-bit + read-only high/low byte select)
ALERT Output Yes (out-of-threshold interrupt) —
Khoảng nhiệt độ hoạt động -40 C to +85 C —
Hộp 16-pin TSSOP, 4.4 mm body width, 1.1 mm height, surface mount 20-pin TSSOP (MO-153AC)
Kiểu lắp đặt Surface Mount Surface Mount
ADC Architecture SAR (successive approximation) —
AutoShutdown Yes —
Trạng thái RoHS Compliant Compliant
Architecture — SAR (Successive Approximation)
Sample Rate — 135 ksps
Digital Supply Voltage — +2.7 V to +5.25 V
Phạm vi điện áp đầu vào — 0 V to +4.096 V (internal ref); up to ±10 V with external resistors
Điện áp tham chiếu — 4.096 V internal (external overdrive allowed)
INL (max) — ±2 LSB
DNL (max) — ±1 LSB (no missing codes)
SINAD — 84 dB at fin = 10 kHz
Power Consumption — 6.7 mW at 135 ksps; 1.4 mW at 10 ksps
Power-Down Current — 1 µA (typ) after conversion
Nhiệt độ hoạt động — 0 °C to +70 °C (commercial C grade)
Cấp MSL — 1 (unlimited floor life)
Internal Clock — Factory-trimmed (no external crystal required)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá