MAX232EIDR vs MAX202CDR So sánh

So sánh chi tiết song song của MAX232EIDR bằng Texas Instruments và MAX202CDR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
MAX232EIDR MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX232EIDR ✓ Hoạt động
Texas Instruments
MAX202CDR MAX202CDR - 5V Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX202CDR - 5V Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX202CDR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX232EIDR MAX202CDR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Dual RS-232 line driver and receiver Dual RS-232 line driver and receiver
Number of Driver Channels 2 —
Number of Receiver Channels 2 —
Điện áp cung cấp 5 V —
Maximum Data Rate 120 kbit/s —
RS-232 Output Voltage ±9 V —
Receiver Input Voltage ±30 V —
Charge-Pump Capacitor Value 1.0 µF —
Number of Charge-Pump Capacitors 4 —
Human-Body-Model ESD Protection 15 kV —
IEC61000-4-2 Air-Gap ESD Protection 15 kV —
IEC61000-4-2 Contact Discharge Protection 8 kV —
Logic Compatibility 5 V TTL/CMOS —
Interface Compliance TIA/EIA-232-F and ITU V.28 —
Hộp 16-pin SOIC 16-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Operating Supply Current [DATA_NEEDED: operating supply current] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Supply Voltage Range — 4.5 V to 5.5 V
Number of Drivers — 2
Number of Receivers — 2
ESD Protection — ±15 kV pin-to-pin on serial-port connection pins, including ground
RS-232 Standard — TIA/EIA-232-F
Interface Function — Electrical interface between asynchronous communication controller and serial-port connector
Charge-Pump Circuit — Dual charge-pump circuit
Channel Configuration — 2 drivers and 2 receivers
Nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Điện áp yên tĩnh — [DATA_NEEDED: quiescent current]
Tốc độ dữ liệu — [DATA_NEEDED: maximum data rate]
Driver Output Voltage — [DATA_NEEDED: RS-232 driver output voltage]
Receiver Input Threshold — [DATA_NEEDED: receiver input threshold]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá