MAX3078EESA+ vs THVD1400DR So sánh

So sánh chi tiết song song của MAX3078EESA+ bằng Analog Devices và THVD1400DR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3078EESA+ MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ - 3.3V RS-485/RS-422 ESD Transceiver

MAX3078EESA+ ✓ Hoạt động
Texas Instruments
THVD1400DR THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments

THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments

THVD1400DR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3078EESA+ THVD1400DR
Thương hiệu Analog Devices Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 transceiver —
Supply Voltage Range 2.97V to 3.63V —
Driver Count 1 —
Receiver Count 1 —
Interface Standards RS-485 and RS-422 —
ESD Protection ±15kV —
Fail-Safe Receiver Logic-high output when receiver inputs are open or shorted —
Hot-Swap Capability Supported —
Unloaded Supply Current 800µA —
Supply Current With Drivers Disabled 800µA when fully loaded —
Hộp 8-pin SOIC 8-pin SOIC (SOIC-8, D suffix)
Kiểu lắp đặt Surface mount Surface Mount
DigiKey Listing Package 8-SOIC —
Manufacturer Product Status PRODUCTION —
Manufacturer Data Sheet Revision Rev. 5 —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Common-Mode Rejection [DATA_NEEDED: common-mode rejection ratio] —
Differential Input Threshold [DATA_NEEDED: differential input threshold] —
Driver Output Current [DATA_NEEDED: driver output current] —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] Compliant
REACH Status [DATA_NEEDED: REACH compliance status] —
Chức năng — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Supply Voltage (VCC) — 3.0 V to 5.5 V
Tốc độ dữ liệu — 500 kbps (max)
Receiver Hysteresis — 50 mV (typ)
Bus Common-Mode Voltage — -7 V to +12 V
ESD Protection (Bus Pins, HBM) — ±16 kV
ESD Protection (Bus Pins, IEC 61000-4-2 Contact) — ±12 kV
Unit Load — 1/8 (256 nodes max)
Lead-Free — Yes
Receiver Fail-Safe — Yes (open, short, idle bus)
Hot-Plug Support — Yes
Điện áp tắt — [DATA_NEEDED: shutdown current value]
Quiescent Current (typ) — [DATA_NEEDED: quiescent current value]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá