MAX3221IDBRE4 vs MAX3221IDBR So sánh
So sánh chi tiết song song của MAX3221IDBRE4 bằng Texas Instruments và MAX3221IDBR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBRE4 ✓ Hoạt độngTexas Instruments
MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments
MAX3221IDBR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3221IDBRE4 | MAX3221IDBR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Single-channel RS-232 line driver and receiver | Single-channel RS-232 line driver and receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Number of Drivers | 1 | 1 |
| Number of Receivers | 1 | 1 |
| Driver and Receiver Configuration | 1/1 full RS-232 transceiver | — |
| ESD Protection | ±15 kV HBM | ±15 kV HBM on serial-port connection pins, including GND |
| Standby Current | 1 µA typical | — |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF |
| 5 V Logic Input Compatibility | 5 V logic input accepted with 3.3 V supply | — |
| RS-232 Standards | TIA/EIA-232-F and ITU V.28 | — |
| Hộp | 16-pin SSOP | 16-pin SSOP |
| Package Width | 5.30 mm | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Receiver Enable | Dedicated enable input | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Typical Standby Current | — | 1 µA |
| Receiver Enable Control | — | 1 dedicated enable input |
| Logic Input Compatibility | — | Accepts 5 V logic input with 3.3 V supply |
| RS-232 Compliance | — | TIA/EIA-232-F and ITU V.28 |
| Charge-Pump Architecture | — | Dual charge-pump circuit |