MAX3232EIPW vs MAX3232ECUP+T So sánh

So sánh chi tiết song song của MAX3232EIPW bằng Texas Instruments và MAX3232ECUP+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
MAX3232EIPW MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

MAX3232EIPW ✓ Hoạt động
Analog Devices
MAX3232ECUP+T MAX3232ECUP+T - 1Mbps True RS-232 Transceiver | Analog Devices

MAX3232ECUP+T - 1Mbps True RS-232 Transceiver | Analog Devices

MAX3232ECUP+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3232EIPW MAX3232ECUP+T
Thương hiệu Texas Instruments Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Device Type Dual RS-232 line driver/receiver with dual charge pump —
Number of Transmit Channels 2 channels —
Number of Receive Channels 2 channels —
Supply Voltage Range 3 V to 5.5 V 3.0V to 5.5V
Maximum Data Rate 250 kbps 1Mbps
ESD Protection ±15 kV IEC ESD, pin-to-pin ±15kV
RS-232 Compliance TIA/EIA-232-F —
Interface Direction Full duplex —
Hộp 16-pin TSSOP 20-pin TSSOP
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Điện áp cung cấp [DATA_NEEDED: supply current] —
Input Logic Voltage [DATA_NEEDED: input logic voltage threshold] —
Output Logic Voltage [DATA_NEEDED: output logic voltage level] —
Driver Output Swing [DATA_NEEDED: RS-232 output swing] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Charge-Pump Capacitors [DATA_NEEDED: recommended charge-pump capacitance] —
Trạng thái RoHS unknown —
REACH Status unknown —
AEC-Q100 Qualification not_applicable —
Product Type — True RS-232 transceiver
Number of Drivers — 2 drivers
Number of Receivers — 2 receivers
Low-Power Supply Current — 10nA minimum
Charge-Pump Architecture — Dual charge pump
Transceiver Configuration — 2/2 full-duplex
ESD Protection Topology — ±15kV on RS-232 pins
Power-Supply Architecture — Single supply
Manufacturer Lifecycle Status — Production
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — Not applicable to this interface-device application

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá