MAX3387EEUG+ vs MAX3387ECUG+ So sánh

So sánh chi tiết song song của MAX3387EEUG+ bằng Analog Devices và MAX3387ECUG+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3387EEUG+ MAX3387EEUG+ - 3V RS-232 Transceiver, 250kbps, ±15kV ESD | Maxim

MAX3387EEUG+ - 3V RS-232 Transceiver, 250kbps, ±15kV ESD | Maxim

MAX3387EEUG+ ✓ Hoạt động
Analog Devices
MAX3387ECUG+ MAX3387ECUG+ - 3V 250kbps RS-232 Transceiver | Analog Devices

MAX3387ECUG+ - 3V 250kbps RS-232 Transceiver | Analog Devices

MAX3387ECUG+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3387EEUG+ MAX3387ECUG+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng Transceiver —
Protocol RS-232 —
Number of Drivers/Receivers 3/3 —
Duplex Full —
Tốc độ dữ liệu 250 kbps —
Điện áp cung cấp 3.0 V to 5.5 V —
ESD Protection (RS-232 pins) ±15 kV (HBM); ±15 kV IEC 61000-4-2 Air Gap —
Nhiệt độ hoạt động -40 °C to +85 °C —
Hộp 24-TSSOP (4.40 mm) 24-pin TSSOP
Kiểu lắp đặt Surface Mount Surface mount
Shutdown Current (AutoShutdown Plus) 1 µA typical —
External Capacitors 4 × 0.1 µF —
INVALID Output Active-low, three drivers —
Standards Compliance EIA/TIA-232, V.28/V.24 —
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Transceiver Configuration — 3 transmitters and 3 receivers
Supply Voltage Range — 3 V to 5.5 V
Nominal Supply Voltage — 3.3 V
Maximum Data Rate — 250 kbps
Communications Standard — EIA/TIA-232 and V.28/V.24
ESD Protection — ±15 kV
Charge-Pump Capacitor Count — 4 capacitors
Charge-Pump Capacitance — 0.1 uF each
Power Architecture — Dual charge pump
Transmitter Output Stage — Proprietary low-dropout design
Power Management Feature — AutoShutdown Plus
REACH Status — [DATA_NEEDED: REACH status]
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Điện áp cung cấp — [DATA_NEEDED: supply current]
Logical Input High Voltage — [DATA_NEEDED: logical input high voltage]
RS-232 Output Voltage Levels — [DATA_NEEDED: driver output voltage levels]
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
Standard Packaging Quantity — [DATA_NEEDED: standard packaging quantity]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá