MAX3483ECSA+ vs MAX3483EESA+ So sánh
So sánh chi tiết song song của MAX3483ECSA+ bằng Analog Devices và MAX3483EESA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
MAX3483ECSA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483ECSA+ ✓ Hoạt độngAnalog Devices
MAX3483EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3483ECSA+ | MAX3483EESA+ |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Điện áp cung cấp | 3.3 V | — |
| Maximum Data Rate | 12 Mbps | 12Mbps |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | 1/1 half-duplex transceiver |
| Bus Standard | RS-485 and RS-422 | — |
| ESD Protection, Human Body Model | ±15 kV | — |
| ESD Protection, IEC 1000-4-2 Contact Discharge | ±8 kV | — |
| ESD Protection, IEC 1000-4-2 Air Gap Discharge | ±15 kV | — |
| Logic Compatibility | 3.3 V operation with 5 V logic interoperability | — |
| Transmitter Edge Rate | Slew-rate limited | — |
| Hộp | 8-pin SOIC | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Supply Voltage Range | — | 3.0V to 3.6V |
| Nominal Supply Voltage | — | 3.3V |
| ESD Protection | — | ±15kV |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Supported Standards | — | RS-422 and RS-485 |
| Driver Slew Rate | — | Slew-rate limited |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |