MAX3483ESA+ vs MAX3483EESA+ So sánh

So sánh chi tiết song song của MAX3483ESA+ bằng Maxim Integrated và MAX3483EESA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ Hoạt động
Analog Devices
MAX3483EESA+ MAX3483EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3483EESA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3483EESA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3483ESA+ MAX3483EESA+
Thương hiệu Maxim Integrated Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Điện áp cung cấp 3.3 V —
Verified Supply Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps 12Mbps
Driver and Receiver Count 1 driver and 1 receiver —
Duplex Mode Half-duplex —
Interface Standards RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
EMI Control Slew-rate limitation reduces EMI and reflections —
Low-Speed Error-Free Transmission Up to 250 kbps —
Power Architecture 3.3V-powered, low-power transceiver —
Hộp 8-SOIC 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Operating Voltage 3 V to 3.6 V —
ESD Protection [DATA_NEEDED: ESD protection rating for MAX3483ESA+] ±15kV
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Điện áp cung cấp [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Receiver Output Type [DATA_NEEDED: receiver output type] —
Termination Requirement [DATA_NEEDED: termination and biasing details] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Supply Voltage Range — 3.0V to 3.6V
Nominal Supply Voltage — 3.3V
Driver Count — 1 driver
Receiver Count — 1 receiver
Supported Standards — RS-422 and RS-485
Transceiver Configuration — 1/1 half-duplex transceiver
Driver Slew Rate — Slew-rate limited
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá