MAX3485CSA+ vs MAX3485ECSA+T So sánh

So sánh chi tiết song song của MAX3485CSA+ bằng Maxim Integrated và MAX3485ECSA+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown
Analog Devices
MAX3485ECSA+T MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3485CSA+ MAX3485ECSA+T
Thương hiệu Maxim Integrated Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Unknown Hoạt động
Product Type RS-485/RS-422 transceiver RS-485/RS-422 half-duplex transceiver
Điện áp cung cấp 3.3 V —
Tốc độ dữ liệu 10 Mbps —
Duplex Mode Half-duplex —
Driver Count 1 driver —
Receiver Count 1 receiver —
Supported Standards RS-485 and RS-422 —
Driver Feature Slew-rate-limited driver family feature —
Short-Circuit Protection Short-circuit current limited driver —
Tắt nhiệt Driver enters high-impedance state during thermal shutdown —
Receiver Feature Fail-safe receiver input —
Hộp 8-SOIC, 0.154 inch, 3.90 mm width 8-pin NSOIC (SOIC-8)
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động 0C to +70C [DATA_NEEDED: operating temperature range]
Channel Direction 1 transmitter and 1 receiver —
ESD Protection [DATA_NEEDED: ESD protection rating] —
Receiver Input Common-Mode Range [DATA_NEEDED: receiver input common-mode range] —
Điện áp cung cấp [DATA_NEEDED: operating and quiescent supply current] —
Logic Output Levels [DATA_NEEDED: logic output voltage levels] —
Termination Requirement [DATA_NEEDED: termination and biasing requirements] —
Supply Voltage Range — 3 V to 3.6 V
Maximum Data Rate — 12 Mbps
ESD Protection (Bus Pins) — +/-15 kV
Driver / Receiver Count — 1 driver, 1 receiver
Duplex — Half-duplex
Driver Output Type — Slew-rate-limited differential
Operating Supply Range — 3.3 V powered, single supply
Trạng thái RoHS — RoHS3 compliant
Lead-Free Status — Lead free
Driver Protection — Short-circuit current limit and thermal shutdown
ESD Rating Reference — +/-15 kV ESD-protected bus pins
Quiescent Supply Current — [DATA_NEEDED: quiescent supply current]
Receiver Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Unit Load / Max Nodes — [DATA_NEEDED: unit load and maximum node count]
Data Rate of Alternative MAX3485CSA+ — 10 Mbps

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá