MAX3485ECSA+T vs MAX3485CSA+T So sánh

So sánh chi tiết song song của MAX3485ECSA+T bằng Analog Devices và MAX3485CSA+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3485ECSA+T MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T ✓ Hoạt động
Analog Devices
MAX3485CSA+T MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX3485ECSA+T MAX3485CSA+T
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 half-duplex transceiver
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V
Maximum Data Rate 12 Mbps 10 Mbps
ESD Protection (Bus Pins) +/-15 kV —
Driver / Receiver Count 1 driver, 1 receiver —
Duplex Half-duplex —
Driver Output Type Slew-rate-limited differential —
Hộp 8-pin NSOIC (SOIC-8) 8-pin SOIC (NSOIC-8)
Kiểu lắp đặt Surface mount Surface mount
Operating Supply Range 3.3 V powered, single supply —
Trạng thái RoHS RoHS3 compliant [DATA_NEEDED: RoHS status]
Lead-Free Status Lead free —
Driver Protection Short-circuit current limit and thermal shutdown —
ESD Rating Reference +/-15 kV ESD-protected bus pins —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] [DATA_NEEDED: quiescent supply current]
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Unit Load / Max Nodes [DATA_NEEDED: unit load and maximum node count] —
Data Rate of Alternative MAX3485CSA+ 10 Mbps —
Driver Channels — 1
Receiver Channels — 1
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Driver Edge Rate — Slew-rate limited
Driver Fault Protection — Short-circuit current limiting and thermal shutdown
Receiver Fail-Safe — Supported
Driver Output State During Thermal Shutdown — High impedance
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Standard Reel Quantity — [DATA_NEEDED: standard reel quantity]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá