MAX485ECSA+ vs MAX485EESA+T So sánh

So sánh chi tiết song song của MAX485ECSA+ bằng Analog Devices và MAX485EESA+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX485ECSA+ MAX485ECSA+ - 2.5 Mbps RS-485 Transceiver | Analog Devices

MAX485ECSA+ - 2.5 Mbps RS-485 Transceiver | Analog Devices

MAX485ECSA+ ✓ Hoạt động
Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX485ECSA+ MAX485EESA+T
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-485/RS-422 line transceiver Half-duplex RS-485/RS-422 transceiver
Transceiver Configuration 1 driver, 1 receiver —
Technology CMOS —
Maximum Data Rate 2.5 Mbps 2.5 Mbps
Number of Drivers 1 —
Number of Receivers 1 —
Interface Standard RS-485 and RS-422 —
Driver Output Protection 15 kV ESD —
Receiver Input Protection 15 kV ESD —
Driver Output Type Slew-rate-limited Slew-rate-limited differential driver
Power Consumption [DATA_NEEDED: power consumption] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.75 V to 5.25 V
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Maximum Bus Nodes [DATA_NEEDED: maximum bus nodes] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Hộp 8-SOIC (0.150 inch, MS-012A) 8-pin NSOIC/SOIC
Kiểu lắp đặt Surface Mount Surface mount
Điện áp cung cấp hoạt động [DATA_NEEDED: operating supply voltage] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Nominal Supply Voltage — 5 V
Receiver Output Type — Differential logic-level receiver
ESD Protection — ±15 kV
Communication Mode — Half-duplex
Supported Standards — RS-485 and RS-422
Driver and Receiver Count — 1 driver and 1 receiver
Power Classification — Low-power transceiver
MSL — [DATA_NEEDED: moisture sensitivity level]
Maximum Bus Length — [DATA_NEEDED: maximum bus length]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá