MPVZ5004GW7U vs MPVZ5004G7U So sánh

So sánh chi tiết song song của MPVZ5004GW7U bằng NXP Semiconductors và MPVZ5004G7U bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPVZ5004GW7U MPVZ5004GW7U - 3.92kPa Pressure Sensor, 5V, SOP-8 | NXP

MPVZ5004GW7U - 3.92kPa Pressure Sensor, 5V, SOP-8 | NXP

MPVZ5004GW7U ✓ Hoạt động
STMicroelectronics
MPVZ5004G7U MPVZ5004G7U - 0-3.92 kPa Gauge Pressure Sensor, 8-DIP

MPVZ5004G7U - 0-3.92 kPa Gauge Pressure Sensor, 8-DIP

MPVZ5004G7U ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPVZ5004GW7U MPVZ5004G7U
Thương hiệu NXP Semiconductors STMicroelectronics
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 psi) 0 kPa to 3.92 kPa (0 to 0.57 PSI)
Pressure Port Male 0.22" (5.59 mm) tube, single axial Vented gauge (back-side referenced to ambient)
Kiểu đầu ra Analog voltage, ratiometric Analog Voltage (ratiometric)
Output Voltage Span 1.0 V to 4.9 V (at 5 V excitation) —
Output Voltage at 0 kPa 1.0 V typ —
Điện áp cung cấp 5.0 V (typ) 4.75 V to 5.25 V (5 V typical)
Điện áp cung cấp 4 mA typ (per datasheet family) —
Accuracy [DATA_NEEDED: linearity/error %] —
Nhiệt độ hoạt động 0 °C to 85 °C 0C to +85C
Storage Temperature [DATA_NEEDED: storage temperature range] —
Hộp 8-DIP Module (Case 1560-02) —
Kiểu lắp đặt Through-Hole (DIP module with tube port) Through-Hole
Technology Piezoresistive MEMS, monolithic silicon —
Signal Conditioning On-chip amplifier, temperature-compensated, calibrated —
Sensitivity approx. 1.0 V / kPa 1.0 V/kPa (typical, ratiometric to 5 V)
Media Compatibility Non-corrosive dry gases (air) —
Trạng thái RoHS [DATA_NEEDED: confirm from datasheet] Compliant
Khoảng điện áp đầu ra — 1.0 V to 4.9 V (ratiometric)
Accuracy (Linearity) — +/-1.5% of full-scale span (typical)
Hộp / Vỏ — 8-DIP Module (axial port)
Port Style — Axial pressure port with vent
Output Impedance — [DATA_NEEDED: output impedance]
Response Time — [DATA_NEEDED: response time]
Moisture Sensitivity — Non-condensing environments only

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá