MSP430F2011IN vs MSP430F2011TN So sánh

So sánh chi tiết song song của MSP430F2011IN bằng Texas Instruments và MSP430F2011TN bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
MSP430F2011IN MSP430F2011IN - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

MSP430F2011IN - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

MSP430F2011IN ✓ Hoạt động
Texas Instruments
MSP430F2011TN MSP430F2011TN - 16MHz 16-Bit MCU | Texas Instruments | Embedded

MSP430F2011TN - 16MHz 16-Bit MCU | Texas Instruments | Embedded

MSP430F2011TN ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MSP430F2011IN MSP430F2011TN
Thương hiệu Texas Instruments Texas Instruments
Danh mục Microcontrollers Microcontrollers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 16-bit ultra-low-power mixed-signal microcontroller —
Tần số xung maksimum 16 MHz —
CPU Architecture 16-bit RISC 16-bit RISC
Register Width 16 bit —
Flash Memory 2 KB 2 KB
SRAM 128 bytes 128 bytes
Supply Voltage Range 1.8 V to 3.6 V [DATA_NEEDED: Supply voltage range]
Active Current 220 µA at 1 MHz and 2.2 V —
Standby Current 0.5 µA [DATA_NEEDED: Standby current]
Off Mode Current 0.1 µA with RAM retention —
Power-Saving Modes 5 modes —
Standby Wake-Up Time Less than 6 µs —
Instruction Cycle Time 125 ns —
Integrated Peripherals Timer and comparator —
Frequency Control FLL+ frequency-locked loop —
Scan Interface Supported for background signal capture —
Hộp 14-PDIP 14-pin PDIP (N)
Kiểu lắp đặt Through-hole Through-hole
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Maximum CPU Frequency — 16 MHz
Distributor Flash Description — 2 KB (2K x 8 + 256 bytes)
Peripheral Category — Timer and comparator
Số chân — 14 pins
Core — MSP430 CPU16
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: Operating temperature range]
Active-Mode Current — [DATA_NEEDED: Active-mode current]
Wake-Up Time — [DATA_NEEDED: Wake-up time]
Number of Comparators — 1 comparator
Number of Timers — [DATA_NEEDED: Number of timers]
Digital I/O Count — [DATA_NEEDED: Digital I/O count]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá