NCV7240DPR2G vs MC33984CHFK So sánh

So sánh chi tiết song song của NCV7240DPR2G bằng onsemi và MC33984CHFK bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

onsemi
NCV7240DPR2G NCV7240DPR2G - 8-Channel 600mA Low-Side Driver | onsemi

NCV7240DPR2G - 8-Channel 600mA Low-Side Driver | onsemi

NCV7240DPR2G ✓ Hoạt động
NXP Semiconductors
MC33984CHFK MC33984CHFK - Dual 4mOhm 12V High-Side Switch | NXP | Automotive

MC33984CHFK - Dual 4mOhm 12V High-Side Switch | NXP | Automotive

MC33984CHFK ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số NCV7240DPR2G MC33984CHFK
Thương hiệu onsemi NXP Semiconductors
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Cấu trúc Octal Low-Side Relay/Solenoid Driver Dual independent high-side switches
Number of Channels 8 (1:8) —
Switch Type N-Channel Open-Drain —
Continuous Drain Current (per channel) 600 mA —
On-Resistance (Rdson, typ) 1.5 ohm [DATA_NEEDED: exact Rdson value] —
Output Control Interface SPI + parallel IN1-IN4 inputs (paired override) —
Điện áp cung cấp hoạt động 3.3 V / 5 V logic; load supply per application [DATA_NEEDED: full VCC range] —
Fault Detection Open-load, short-to-ground, over-load, over-temperature —
Protection Features Thermal shutdown, current limit, fault reporting via SPI —
Parallel Input Pins 4 (IN1-IN4, paired control of channels) —
Hộp SSOP-24 (DPR suffix, 24-pin SSOP) 16-pin PQFN (12x12) with exposed pad
Kiểu lắp đặt Surface Mount Surface Mount
Nhiệt độ hoạt động -40 C to +125 C (automotive grade) —
Automotive Qualification AEC-Q100 qualified (NCV series) —
Cấp MSL [DATA_NEEDED: MSL rating] —
Trạng thái RoHS Compliant Compliant
Reel Quantity 2500 (per 'R2' suffix standard) —
Chức năng — High-Side Switch (Dual 1:2 N-Channel)
Số lượng đầu ra — 2
On-State Resistance (Rds_on) — 4 mOhm per channel (typical)
Supply Voltage Range — 6 V to 27 V
Continuous Output Current — 15 A per channel (per datasheet)
Load Type — DC / inductive (relays, solenoids, lamps, motors)
Self-Protection Features — Over-current, over-voltage, over-temperature with self-recovery
Diagnostic Output — Current sense and per-channel fault flag
Control Interface — CMOS-compatible logic inputs IN_A / IN_B
Khoảng nhiệt độ hoạt động — -40C to +125C (automotive grade)
Family — 12XS2 eXtreme Switch

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá