OPA640P vs OPA642P So sánh

So sánh chi tiết song song của OPA640P bằng Texas Instruments và OPA642P bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
OPA640P OPA640P - 1.3 GHz Wideband Op Amp | Texas Instruments

OPA640P - 1.3 GHz Wideband Op Amp | Texas Instruments

OPA640P ✓ Hoạt động
Texas Instruments
OPA642P OPA642P - 400MHz Wideband Op Amp | Texas Instruments

OPA642P - 400MHz Wideband Op Amp | Texas Instruments

OPA642P ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số OPA640P OPA642P
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Voltage-feedback operational amplifier Wideband, low-distortion, low-gain operational amplifier
Number of Circuits 1 circuit 1 circuit
Unity-Gain Bandwidth 1.3 GHz —
Unity-Gain Stability Unity-gain stable —
Input Voltage Noise Density 2.9 nV/√Hz —
Common-Mode Rejection Ratio 85 dB 90 dB
Slew Rate 350 V/µs [DATA_NEEDED: slew rate]
Low-Harmonic-Distortion Frequency 10 MHz —
Hộp 8-pin PDIP 8-pin PDIP
Package Technology Through-hole DIP —
Package Width 0.300 in (7.62 mm) —
Number of Terminals 8 terminals —
Temperature Grade Industrial —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
Input Bias Current [DATA_NEEDED: input bias current] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Kiểu lắp đặt Through-hole Through-hole
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Amplifier Topology — Single voltage-feedback amplifier
Gain-Bandwidth Product — 400 MHz
Điện áp cung cấp — ±5.5 V
Open-Loop Gain — 95 dB
Input Noise Density — 2.7 nV/√Hz
Low-Distortion Frequency — 5 MHz
Settling Performance — 12-bit settling to 0.01%
Điện áp tối đa đầu ra — ±60 mA
Số chân — 8 pins

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá