PCA9675D vs PCF8575DW So sánh
So sánh chi tiết song song của PCA9675D bằng NXP Semiconductors và PCF8575DW bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
So sánh thông số kỹ thuật
| Tham số | PCA9675D | PCF8575DW |
|---|---|---|
| Thương hiệu | NXP Semiconductors | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Remote 16-bit I/O expander | — |
| Number of I/O Lines | 16 lines | 16 |
| Bus Interface | I2C two-wire bidirectional bus | — |
| I2C Bus Speed | 1 MHz | 400 kHz fast mode |
| I2C Mode | Fast-mode Plus (Fm+) | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.5 V to 5.5 V |
| I2C Bus Drive | 30 mA | — |
| Interrupt Function | Supported | — |
| Hộp | 24-pin SOIC, 7.50 mm width | 24-pin SOIC |
| Package Type | 24-SO | SOIC |
| Packaging | Tube | — |
| Kiểu lắp đặt | Surface mount | — |
| Nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| Output Drive Configuration | [DATA_NEEDED: output configuration for each port] | — |
| Điện áp yên tĩnh | [DATA_NEEDED: quiescent current] | — |
| Trạng thái RoHS | unknown | RoHS-compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Remote 16-bit I2C/SMBus I/O expander |
| I2C Maximum Clock Frequency | — | 400 kHz |
| Giao diện | — | I2C/SMBus |
| Interrupt Output | — | Open-drain |
| Hardware Address Pins | — | 3 |
| Maximum Addressable Devices | — | 8 devices |
| Standby Current | — | 10 uA maximum |
| Kiểu đầu ra | — | Latched |
| Output Drive Capability | — | High-current drive capability |
| Output High Configuration | — | Current source to VCC for active-high drive |
| Khoảng nhiệt độ hoạt động | — | -40 C to +85 C |
| Số lượng chân | — | 24 |
| Điện áp cung cấp | — | 3.3 V |
| Standby-Current Consumption | — | 10 uA maximum |
| Addressing Method | — | Three hardware address pins |
| Input/Output Configuration | — | General-purpose remote digital I/O |