SN65HVD07D vs SN65HVD05D So sánh

So sánh chi tiết song song của SN65HVD07D bằng Texas Instruments và SN65HVD05D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD07D SN65HVD07D - 1 Mbps RS-485 Transceiver | Texas Instruments

SN65HVD07D - 1 Mbps RS-485 Transceiver | Texas Instruments

SN65HVD07D ✓ Hoạt động
Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD07D SN65HVD05D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-485 half-duplex transceiver Half-duplex RS-422/RS-485 transceiver
Transceiver Configuration 1 transmitter / 1 receiver —
Maximum Data Rate 1 Mbps —
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V
Nominal Supply Voltage 5 V —
Communication Mode Half duplex Half-duplex
Supported Standards ANSI TIA/EIA-485-A and ISO 8482E —
Driver Output State Three-state differential output 3-state
Receiver Input Differential input —
Unit Load 1/8 unit load —
Maximum Bus Nodes 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM Exceeds 16 kV HBM
Output Slew Rate Controlled —
Khoảng nhiệt độ hoạt động -40 °C to 85 °C [DATA_NEEDED: operating temperature range]
Hộp 8-pin SOIC (D) 8-pin SOIC (D)
Kiểu lắp đặt Surface mount Surface mount
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Minimum Differential Output Voltage — 2.5 V into a 54-ohm load
Receiver Failsafe Behavior — Open-circuit, short-circuit, and idle-bus failsafe
Unit Load Option — 1/8 unit load
Maximum Node Count — Up to 256 nodes on the bus
Driver Output Slew Rate — Controlled
Standards Compatibility — ANSI TIA/EIA-485-A and ISO 8482E
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá