SN65HVD12P vs SN65HVD10P So sánh
So sánh chi tiết song song của SN65HVD12P bằng Texas Instruments và SN65HVD10P bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
SN65HVD12P - 3.3V 1Mbps RS-485 Transceiver | Texas Instruments
SN65HVD12P ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | SN65HVD12P | SN65HVD10P |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | USB Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Differential bus transceiver | Half-duplex RS-485 transceiver |
| Điện áp cung cấp | 3.3 V | 3.3 V |
| Maximum Data Rate | 1 Mbps | — |
| Supported Interfaces | RS-422 and RS-485 | — |
| Driver Output Type | Three-state differential output | Three-state differential line driver |
| Receiver Type | Differential input line receiver | Differential line receiver |
| Duplex Mode | Half-duplex | Half-duplex |
| Hộp | 8-PDIP | 8-pin PDIP (P) |
| Số chân | 8 pins | 8 pins |
| Kiểu lắp đặt | Through-hole | Through-hole |
| Bus-Pin ESD Protection | Greater than 16 kV HBM | Exceeds 16 kV HBM |
| Maximum Bus Unit Load | [DATA_NEEDED: maximum bus unit load] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Differential Sensitivity | [DATA_NEEDED: receiver differential sensitivity] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| ANSI TIA/EIA-485-A Compliance | Meets or exceeds | — |
| ISO 8482:1993 Compliance | Meets or exceeds | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Maximum Signaling Rate | — | 32 Mbps |
| Interface Standard | — | RS-485 |
| Unit-Load Option | — | 1/8 unit load, up to 256 nodes |
| Standards Compliance | — | ANSI TIA/EIA-485-A and ISO 8482:1993 |
| Nhiệt độ hoạt động | — | -40 °C to +85 °C |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Device Type | — | 1/1 transceiver, half-duplex |