SN65HVD78D vs SN65HVD30D So sánh

So sánh chi tiết song song của SN65HVD78D bằng Texas Instruments và SN65HVD30D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD78D SN65HVD78D - 3.3V 50Mbps Half-Duplex RS-485 | TI

SN65HVD78D - 3.3V 50Mbps Half-Duplex RS-485 | TI

SN65HVD78D ✓ Hoạt động
Texas Instruments
SN65HVD30D SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD30D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD78D SN65HVD30D
Thương hiệu Texas Instruments Texas Instruments
Danh mục USB Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 3.3 V half-duplex RS-485 transceiver 3.3 V full-duplex RS-485 driver and receiver
Supply Voltage Range 3 V to 3.6 V —
Nominal Supply Voltage 3.3 V —
Maximum Signaling Rate 50 Mbps —
Driver Count 1 —
Receiver Count 1 —
Duplex Mode Half-duplex Full-duplex
Bus Standard RS-485 —
Hộp 8-pin SOIC 8-pin SOIC (D)
Khoảng nhiệt độ hoạt động -40°C to +125°C —
Kiểu lắp đặt Surface mount Surface mount
ESD Protection Human Body Model and IEC Contact Discharge on bus pins —
IEC Contact Discharge Protection ±12 kV —
Fault Protection Voltage -13 V to +16.5 V —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Điện áp cung cấp — 3.3 V
Supported Standards — RS-422 and RS-485
Bus Length — up to 1500 m
Driver Output — 3-state differential line driver
Receiver Input — Differential-input line receiver
Logic Interface — Separate driver and receiver input and output pins
Nhiệt độ hoạt động — -40°C to 85°C
Tốc độ dữ liệu — [DATA_NEEDED: maximum signaling rate]
Driver Differential Output Voltage — [DATA_NEEDED: driver differential output voltage]
Receiver Differential Input Threshold — [DATA_NEEDED: receiver differential input threshold]
Điện áp cung cấp — [DATA_NEEDED: operating supply current]
Power-Supply Rejection Ratio — [DATA_NEEDED: power-supply rejection ratio]
Moisture Sensitivity Level — [DATA_NEEDED: moisture sensitivity level]
Kháng nhiệt — [DATA_NEEDED: junction-to-ambient thermal resistance]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá