SN75176ADR vs MAX485EESA+ So sánh

So sánh chi tiết song song của SN75176ADR bằng Texas Instruments và MAX485EESA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN75176ADR SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments

SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments

SN75176ADR ✓ Hoạt động
Analog Devices
MAX485EESA+ MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN75176ADR MAX485EESA+
Thương hiệu Texas Instruments Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Differential bus transceiver RS-485/RS-422 Transceiver
Supported Interface RS-422 and RS-485 —
Supply Voltage Range 4.75 V to 5.25 V —
Hộp 8-pin SOIC —
Số lượng chân 8 pins —
Kiểu lắp đặt Surface Mount Surface Mount
Communication Mode Bidirectional —
Bus Topology Multipoint transmission —
Transmission Line Type Balanced transmission lines —
Driver Output State 3-state output —
Receiver Output State 3-state output —
Noise Environment Designed for long bus lines in noisy environments —
ANSI Standard ANSI Standard EIA/TIA-422-B —
ITU Recommendation ITU Recommendation V.11 —
Unit Price at Quantity 1 USD 0.4602 as of 2026-10-29 —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Maximum Data Rate [DATA_NEEDED: maximum data rate] —
Differential Input Sensitivity [DATA_NEEDED: differential input sensitivity] —
Driver Output Current [DATA_NEEDED: driver output current] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
Tốc độ dữ liệu — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Driver Slew Rate — Limited (low-EMI)
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
Hộp / Vỏ — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
Cấp MSL — 1 (Unlimited)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá