SN75176AP vs SN75176 So sánh
So sánh chi tiết song song của SN75176AP bằng Texas Instruments và SN75176 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
SN75176AP - 5V RS-422/RS-485 Transceiver | Texas Instruments
SN75176AP ✓ Hoạt độngTexas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | SN75176AP | SN75176 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | 1/1 differential bus transceiver | — |
| Điện áp cung cấp | 5 V | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Half-duplex | — |
| Driver Output | Three-state | — |
| Receiver Output | Three-state | — |
| Interface Standards | ANSI EIA/TIA-422-B and ITU Recommendation V.11 | — |
| Bus Architecture | Balanced multipoint transmission line | — |
| Hộp | 8-pin PDIP (P) | 8-pin PDIP (P) |
| Kiểu lắp đặt | Through-hole | Through-Hole |
| Nhiệt độ hoạt động | 0 °C to 70 °C | 0 °C to +70 °C |
| Số chân | 8 pins | — |
| Transceiver Direction | Bidirectional differential bus communication | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Chức năng | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| Driver Output Current | — | ±60 mA (max) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |