SP3232EP-L vs SN75176BD So sánh

So sánh chi tiết song song của SP3232EP-L bằng Sipex và SN75176BD bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Sipex
SP3232EP-L SP3232EP-L - 3.0V RS-232 Transceiver | Sipex

SP3232EP-L - 3.0V RS-232 Transceiver | Sipex

SP3232EP-L ✓ Hoạt động
Texas Instruments
SN75176BD SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)

SN75176BD ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP3232EP-L SN75176BD
Thương hiệu Sipex Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-232 transceiver Differential bus transceiver
Supply Voltage Range +3.0 V to +5.5 V —
Minimum Data Rate Under Full Load 120 kbps —
RS-232 Interoperability Down to +2.7 V power source —
Enhanced ESD Protection ±15 kV —
Compliance True EIA/TIA-232-F standards from +3.0V to +5.5V power supply —
Low-Power Shutdown 1 µA with receivers active (SP3222) —
Hộp 16-pin SSOP SOIC (D), 8 pins
Kiểu lắp đặt Surface mount Surface mount
Số lượng chân 16 —
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Điện áp cung cấp [DATA_NEEDED: typical and maximum supply current] —
Driver Output Levels [DATA_NEEDED: driver output voltage levels] —
Receiver Input Levels [DATA_NEEDED: receiver input voltage thresholds] —
Slew Rate [DATA_NEEDED: driver slew rate] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Điện áp cung cấp — 5 V
Supported Standards — TIA/EIA-422-B and TIA/EIA-485-A
ITU Recommendations — V.11 and X.27
Communication Mode — Bidirectional
Bus Architecture — Multipoint transmission
Transmission Line Type — Balanced transmission lines
Driver Output State — 3-state
Receiver Output State — 3-state
Khoảng nhiệt độ hoạt động — 0 °C to 70 °C
Số chân — 8 pins
Manufacturer — Texas Instruments
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Input and Output Electrical Limits — [DATA_NEEDED: input and output electrical limits]
Propagation Delay — [DATA_NEEDED: propagation delay]
Điện áp yên tĩnh — [DATA_NEEDED: quiescent current]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá