SP485EN-L vs SN75176 So sánh

So sánh chi tiết song song của SP485EN-L bằng MaxLinear và SN75176 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485EN-L SN75176
Thương hiệu MaxLinear Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex differential transceiver —
Interface Standards RS-422 and RS-485 —
Maximum Data Rate 5 Mbps —
Supply Voltage Range 4.75V to 5.25V —
Nominal Supply Voltage 5 V —
Khoảng nhiệt độ hoạt động -40°C to +85°C —
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Duplex Mode Half-duplex —
Receiver Input Type Differential Schmitt-trigger input —
Process Technology BiCMOS —
Hộp 8-pin SOIC 8-pin PDIP (P)
Package Width 3.9 mm —
Package Length 4.9 mm —
Kiểu lắp đặt Surface mount Through-Hole
Transceiver Count per Package 1 —
Supply Decoupling Requirement [DATA_NEEDED: recommended decoupling capacitor value and ESR] —
Driver Output Current [DATA_NEEDED: driver output current] ±60 mA (max)
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Propagation Delay [DATA_NEEDED: receiver and driver propagation delay] —
Input Impedance [DATA_NEEDED: receiver input impedance] —
Shutdown Function [DATA_NEEDED: shutdown or power-save support] —
Trạng thái RoHS unknown Compliant
REACH Status unknown —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Chức năng — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Receiver Hysteresis — 50 mV (typical)
Supply Voltage (Vcc) — 4.75 V to 5.25 V
Nhiệt độ hoạt động — 0 °C to +70 °C
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV
Quiescent Supply Current (enabled) — 30 mA (typical)
Shutdown Supply Current — 1 µA (typical)
Standards Compliance — ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá