SP485EN-L vs SP485REN-L So sánh

So sánh chi tiết song song của SP485EN-L bằng MaxLinear và SP485REN-L bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ Hoạt động
MaxLinear
SP485REN-L SP485REN-L - 5Mbps RS-485 Transceiver | MaxLinear | SOIC-8

SP485REN-L - 5Mbps RS-485 Transceiver | MaxLinear | SOIC-8

SP485REN-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485EN-L SP485REN-L
Thương hiệu MaxLinear MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex differential transceiver Half-duplex RS-422/RS-485 transceiver
Interface Standards RS-422 and RS-485 —
Maximum Data Rate 5 Mbps 5 Mbps
Supply Voltage Range 4.75V to 5.25V 4.75 V to 5.25 V
Nominal Supply Voltage 5 V —
Khoảng nhiệt độ hoạt động -40°C to +85°C -40°C to 85°C
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Duplex Mode Half-duplex Half-duplex
Receiver Input Type Differential Schmitt-trigger input —
Process Technology BiCMOS BiCMOS
Hộp 8-pin SOIC 8-pin SOIC, 3.90 mm wide body
Package Width 3.9 mm —
Package Length 4.9 mm —
Kiểu lắp đặt Surface mount Surface mount
Transceiver Count per Package 1 —
Supply Decoupling Requirement [DATA_NEEDED: recommended decoupling capacitor value and ESR] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Propagation Delay [DATA_NEEDED: receiver and driver propagation delay] —
Input Impedance [DATA_NEEDED: receiver input impedance] —
Shutdown Function [DATA_NEEDED: shutdown or power-save support] —
Trạng thái RoHS unknown [DATA_NEEDED: RoHS compliance status]
REACH Status unknown [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Receiver Input Load — 1/10 unit load
Maximum Nodes per Bus — More than 400 transceivers
Quiescent Supply Current — 900 uA
Receiver Input Impedance — High impedance
Supported Standards — RS-422 and RS-485
Logic Supply Voltage — 4.75 V to 5.25 V
Enhanced ESD Protection — [DATA_NEEDED: enhanced ESD protection level]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá