SSM2143PZ vs INA134PA So sánh

So sánh chi tiết song song của SSM2143PZ bằng Analog Devices và INA134PA bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA134PA INA134PA - 0dB Audio Differential Receiver | Texas Instruments

INA134PA - 0dB Audio Differential Receiver | Texas Instruments

INA134PA ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SSM2143PZ INA134PA
Thương hiệu Analog Devices Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Amplifier Type Audio Differential Line Receiver —
Number of Circuits 1 —
Nominal Gain (G = 1/2) 0.5 (configurable to 2) —
Kiểu đầu ra Single-ended —
Slew Rate 10 V/us typical 14V/µs
-3 dB Bandwidth 7 MHz typical —
Common-Mode Rejection (DC) 90 dB typical —
Common-Mode Rejection (60 Hz) 90 dB typical —
Common-Mode Rejection (20 kHz) 85 dB typical —
Total Harmonic Distortion + Noise 0.0006 % typical at 1 kHz; <0.004 % full audio band —
Điện áp cung cấp 2.7 mA typical —
Supply Voltage Range (Dual) ±6 V to ±18 V —
Supply Voltage Range (Single) 6 V to 36 V —
Maximum Differential Input +28 dBu at G = 1/2 —
Nhiệt độ hoạt động -40 C to +85 C —
Hộp 8-PDIP (PZ), 0.300 in / 7.62 mm 8-pin PDIP (P)
Kiểu lắp đặt Through-Hole Through-hole
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS compliance status]
Product Type — Single audio differential line receiver
Gain — 1V/V (0dB)
Differential Distortion — 0.0005% at 1kHz
Common-Mode Rejection Ratio — 90dB
Supply Range — ±18V
Điện áp yên tĩnh — 2.9mA maximum
Settling Time — 0.01% settling time specification; timing value not provided
Number of Channels — 1 channel
Số chân — 8 pins
Khoảng nhiệt độ hoạt động — -40°C to +85°C
Integrated Components — High-performance operational amplifiers with on-chip precision resistors
Output Drive — High output drive capability; current value not provided
Output Voltage Swing — Wide output voltage swing; numeric limits not provided
REACH Status — [DATA_NEEDED: REACH compliance status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá