THS4141ID vs THS4140ID So sánh

So sánh chi tiết song song của THS4141ID bằng Texas Instruments và THS4140ID bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
THS4141ID THS4141ID - 160MHz Fully Differential Amplifier | Texas Instruments

THS4141ID - 160MHz Fully Differential Amplifier | Texas Instruments

THS4141ID ✓ Hoạt động
Texas Instruments
THS4140ID THS4140ID - 160MHz Differential Amplifier | Texas Instruments

THS4140ID - 160MHz Differential Amplifier | Texas Instruments

THS4140ID ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số THS4141ID THS4140ID
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Amplifier Type Fully differential input/differential output amplifier 1 circuit differential amplifier
Number of Circuits 1 circuit —
-3 dB Bandwidth 160 MHz at ±15 V —
Slew Rate 450 V/us 450 V/us
Third-Harmonic Distortion -79 dB at 1 MHz -79 dB
Input-Referred Noise 6.5 nV/Hz —
Input Offset Voltage 7 mV —
Gain Tolerance 1 dB —
Common-Mode Noise Rejection Balanced outputs reject common-mode noise —
Khoảng nhiệt độ hoạt động -40 °C to +85 °C -40C to +85C
Supply Condition for Bandwidth ±15 V —
Hộp 8-pin SOIC 8-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Process Technology Complementary bipolar BiComI process —
Signal-Path Architecture True differential input-to-differential output —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — Fully differential input/output amplifier
Differential Gain Bandwidth — 160 MHz -3 dB bandwidth
Shutdown Function — Yes
Primary Application — Single-ended-to-differential conversion
ADC Driver Capability — Differential ADC driver
Supply Voltage Range — +/-16.5 V / 33 V
Typical Supply Current — 13.2 mA
Input Bias Current — 15 uA
Maximum Positive Input Voltage — 0.7 V below positive supply
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Trạng thái vòng đời — Active

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá