TLE6251DSXUMA1 vs TLE6251DSXUMA2 So sánh

So sánh chi tiết song song của TLE6251DSXUMA1 bằng Infineon và TLE6251DSXUMA2 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
TLE6251DSXUMA1 TLE6251DSXUMA1 - 1Mbit CAN Transceiver | Infineon

TLE6251DSXUMA1 - 1Mbit CAN Transceiver | Infineon

TLE6251DSXUMA1 Obsolete
Infineon
TLE6251DSXUMA2 TLE6251DSXUMA2 - 1Mbaud CAN Transceiver | Infineon

TLE6251DSXUMA2 - 1Mbaud CAN Transceiver | Infineon

TLE6251DSXUMA2 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số TLE6251DSXUMA1 TLE6251DSXUMA2
Thương hiệu Infineon Infineon
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Obsolete Hoạt động
Product Type CAN interface transceiver High-speed CAN bus transceiver
CAN Data Rate 1 Mbaud —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Nominal Supply Voltage 5 V —
Protocol Compatibility ISO 11898-2 and ISO 11898-5 —
Bus Configuration CAN bus —
Standby Function Yes —
Temperature Handling Automatic temperature behavior —
Hộp 8-pin SOIC-compatible surface-mount package PG-DSO-8, 8-SOIC, 3.90 mm width
Kiểu lắp đặt Surface mount Surface mount
Automotive Qualification [DATA_NEEDED: automotive qualification grade] AEC-Q100
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 °C to 150 °C
Transmitter Output Current [DATA_NEEDED: transmitter output current] —
Receiver Output Current [DATA_NEEDED: receiver output current] —
Bus Propagation Delay [DATA_NEEDED: bus propagation delay] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
ESD Protection [DATA_NEEDED: ESD protection ratings] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
CAN Protocol Support — ISO 11898-2 and ISO 11898-5
Maximum Data Rate — 1 Mbaud
Number of Drivers — 1 driver
Number of Receivers — 1 receiver
Driver and Receiver Arrangement — 1/1 transceiver
Duplex Mode — Full duplex
Receiver Hysteresis — 200 mV
Remote Wake-Up — Supported through CAN bus in low-power mode
Low-Power Behavior — Sleep and standby operation
Moisture Sensitivity Level — MSL 2A, 4 weeks
Lead-Free Status — [DATA_NEEDED: lead-free status]
Termination Resistor — [DATA_NEEDED: integrated termination resistor configuration]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá