TPS4H000AQPWPRQ1 vs TPS4H000BQPWPRQ1 So sánh

So sánh chi tiết song song của TPS4H000AQPWPRQ1 bằng Texas Instruments và TPS4H000BQPWPRQ1 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
TPS4H000AQPWPRQ1 TPS4H000AQPWPRQ1 - 40V Quad Smart High-Side Switch | TI

TPS4H000AQPWPRQ1 - 40V Quad Smart High-Side Switch | TI

TPS4H000AQPWPRQ1 ✓ Hoạt động
Texas Instruments
TPS4H000BQPWPRQ1 TPS4H000BQPWPRQ1 - 40V 4-Ch Smart High-Side Switch | TI

TPS4H000BQPWPRQ1 - 40V 4-Ch Smart High-Side Switch | TI

TPS4H000BQPWPRQ1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số TPS4H000AQPWPRQ1 TPS4H000BQPWPRQ1
Thương hiệu Texas Instruments Texas Instruments
Danh mục LED Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Quad-channel smart high-side switch Quad-channel smart high-side switch
Number of Channels 4 4
Maximum Input Voltage 40 V —
On-Resistance (RDS(on)) 1000 mΩ per channel —
Adjustable Current Limit Yes (external, per datasheet) —
Current-Sense Output Yes, high-accuracy current sense —
Diagnostics Open-load and fault diagnostics (version A reporting) Open-load, short-circuit, thermal, full fault reporting
Integrated Charge Pump Yes —
Protection Fully protected (overload, inrush limiting) Overload, thermal shutdown, output clamp
Automotive Qualification AEC-Q100 qualified (Q1) —
Hộp 20-HTSSOP (PWP) with power pad 20-pin HTSSOP (PWP) with exposed pad
Kiểu lắp đặt Surface Mount Surface Mount
Cấu hình đầu ra High-side, N-Channel —
Family Versions A version (this part) and B version with different diagnostic reporting —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Supply Voltage Range — 3.4 V to 40 V
On-Resistance (per channel) — 1000 mOhm (typical)
Rated Output Current (per channel) — 750 mA
Giới hạn dòng điện — External, adjustable
Current Sense — High-accuracy, multiplexed via CS pin
Control Inputs — IN1, IN2, IN3, IN4, SEL
Qualification — AEC-Q100 qualified (automotive)
Power FET Type — Integrated NMOS with internal charge pump
Target Rails — 12-V and 24-V automotive/industrial

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá