VSC7161XHK vs VSC7170XYQ-01 So sánh

So sánh chi tiết song song của VSC7161XHK bằng Analog Devices và VSC7170XYQ-01 bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
VSC7161XHK VSC7161XHK - 10-Port SAS Expander 1.5/3.0 Gbps | Analog Devices

VSC7161XHK - 10-Port SAS Expander 1.5/3.0 Gbps | Analog Devices

VSC7161XHK ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số VSC7161XHK VSC7170XYQ-01
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động NRND
Device Type 10-port SAS expander —
Number of SAS Ports 10 ports —
Supported SAS Link Rates 1.5 Gbps and 3.0 Gbps —
Package Type TQFP-176 (XHK), surface mount —
Số chân 176 leads —
Protocol Support SAS (Serial Attached SCSI) and SATA device support —
Primary Application Server and enclosure storage systems for midrange and enterprise storage —
Chức năng Active SAS port expansion for storage enclosures —
Upgrade Path Evolutionary path to higher-rate SAS host adapters —
Operating Voltage [DATA_NEEDED: core supply voltage] —
Power Consumption [DATA_NEEDED: typical / max power dissipation] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: ambient operating temperature range] [DATA_NEEDED: operating temperature range]
Enclosure Management Support [DATA_NEEDED: enclosure management and fan control feature set] —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance statement] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance statement] —
AEC-Q100 Qualification Not applicable (storage interface IC, not automotive grade) —
Lead-Free Construction [DATA_NEEDED: lead-free termination statement] —
Standard Configuration 10-port SAS expander at 1.5 Gbps and 3.0 Gbps —
Product Type — SATA Port Selector / 2:1 Failover Multiplexer
Number of Ports — 2:1 (one active host/target port of two)
Supported Data Rates — 1.5 Gbps (SATA Gen1) and 3.0 Gbps (SATA Gen2)
SATA Specification — Serial ATA II Port Selector Specification Rev 1.0
Operating Mode — Failover (per spec) or active-active dual-initiator
Output Swing / De-emphasis — Integrated, programmable via I2C
Input Equalization — Integrated adaptive receive equalization
OOB Signal Support — COMINIT, COMRESET, COMWAKE pass-through
Hot Plug Support — Yes (per SATA II port selector spec)
Configuration Interface — I2C / 2-wire serial
Core Supply Voltage — 1.2 V
I/O Supply Voltage — 3.3 V
Hộp — 132-pin LQFP
Kiểu lắp đặt — Surface Mount
Internal Termination — 50 ohm differential on all ports

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá