10M25DAF484C8G - MAX 10 FPGA 25K LE 484-BGA | Intel | CPLD/FPGA
MPN: 10M25DAF484C8G ✓ Hoạt động10M25DAF484C8G Tóm tắt
A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory/DSP slices that designers can reconfigure post-manufacture to implement arbitrary digital functions. In the broader system hierarchy, FPGAs sit between microcontrollers (fixed-instruction, low power) and ASICs (application-specific, highest density/perf), offering parallel hardware execution, deterministic latency, and hardware-level I/O customization. MAX 10 specifically targets glue-logic, I/O expansion, motor control, and low-cost system-on-module integration with the convenience of non-volatile configuration.
Key features of the 10M25DAF484C8G include 25,000 logic elements, 1,638 Kbit embedded memory, integrated dual-configuration flash, optional 12-bit 1 MSPS ADC, up to 360 general-purpose I/O, and built-in PLLs. The F484 FineLine BGA at 23 × 23 mm with 1.0 mm pitch balances high I/O density with manageable PCB routing, while commercial temperature grade supports industrial and consumer designs without -I (industrial) or -A (automotive) screening.
The MAX 10 architecture pairs a Logic Array Block (LAB) fabric of adaptive logic modules (ALMs) with MultiTrack interconnect, hardware multipliers, and DSP blocks. The on-die flash enables instant-on (<10 ms) single-chip operation, eliminating external boot memories. PLL-based clock management supports up to 16 global clocks with low jitter, and the ADC block (when present) provides analog signal capture without external components.
Typical applications include industrial motor control and PLC I/O expansion, factory automation HMI controllers, low-cost video processing and bridging, prototyping platforms, and consumer appliance controllers. The integrated ADC makes it especially attractive for mixed-signal motor-drive and sensor-conditioning designs.
When designing with the 10M25DAF484C8G, ensure adequate decoupling (100 nF + 10 µF per VCCIO/VCCINT bank) and follow Intel's pinout guidelines for the F484 package. Quartus Prime Lite/Standard edition supports the full MAX 10 family free of charge. The commercial -8C speed grade requires junction temperature stays within 0 °C to 85 °C ambient.
This page synthesizes distributor pricing, same-family drop-in alternatives (10M25DAF484C7G, 10M25DAF484A7P, 10M25DAF484A7G), and practical design considerations not aggregated in any single manufacturer document.
Bộ thay thế dễ dàng lắp đặt cho 10M25DAF484C8G — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 10M25DAF484C8G (cùng hình factor và footprint) — khác nhau ở Package, PLLs, Operating Temperature, Speed Grade, Process Technology.
10M25DAF484C7G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10M25DAF484A7G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10M25DAF484A7P
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10M50DAF484C8G
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
10M16DAF484C7G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10M08DAF484C8G
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10M25DAF484C8G Tỷ lệ tối đa & tính chất điện
| Family | MAX 10 |
| Logic Elements | 25,000 |
| Embedded Memory (Kbits) | 1638 |
| User I/O Count | 360 |
| Process Technology | 55 nm CMOS |
| Core Supply Voltage (VCCINT) | 1.2 V (1.15 V min / 1.25 V max) |
| Hộp | 484-ball FineLine BGA (F484), 23 × 23 mm, 1.0 mm pitch |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | 0 °C to 85 °C (Commercial) |
| Speed Grade | -8 |
| Configuration Memory | On-chip dual-configuration flash |
| ADC | Integrated 12-bit ADC (where enabled) |
| PLLs | Yes (up to 4 analog PLLs per device) |
| Trạng thái RoHS | Compliant |
| Cấp MSL | MSL3 |
| Number of I/O Banks | 8 (per F484 pinout) |
Hướng dẫn cấu hình chân 10M25DAF484C8G 484-ball fineline bga (f484), 23 × 23 mm, 1.0 mm pitch
Cấu hình chân cho 10M25DAF484C8G (484-ball fineline bga (f484), 23 × 23 mm, 1.0 mm pitch gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho 10M25DAF484C8G.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
10M25DAF484C8G phù hợp cho 7 Áp dụngs: Industrial Motor Control, PLC and Industrial I/O Expansion, Video Bridging and Display Processing, Factory Automation HMI Controllers, IoT Edge Sensor Aggregation, Consumer Appliance Control, Prototyping and Hardware Emulation.
Industrial Motor Control
The 10M25DAF484C8G is well-suited for industrial motor control applications because its 25,000 logic elements and dedicated hardware multipliers can execute field-oriented control (FOC) algorithms for three-phase PMSM and BLDC motors in parallel, while the integrated 12-bit ADC samples phase currents and back-EMF without external components. The 360 user I/O pins in the F484 BGA package provide ample channels for PWM outputs, encoder feedback, and resolver interfaces. Per Intel's MAX 10 motor-control reference designs, the device sustains 20 kHz switching frequencies for sub-kW drives, with the -8C speed grade ensuring deterministic interrupt latency. Power consumption stays low thanks to the 55 nm CMOS process, making the part appropriate for sealed industrial enclosures. Compared to MCU-only solutions, the FPGA fabric absorbs the entire control loop, freeing a host processor for supervisory tasks.
Được đề xuất
PLC and Industrial I/O Expansion
In PLC and industrial I/O expansion systems, the 10M25DAF484C8G serves as a programmable logic controller backbone that aggregates discrete and analog field signals. The 360 I/O pins across 8 banks support 3.3 V LVCMOS, 5 V tolerant, RS-485, and LVDS interfacing, while the 1,638 Kbit embedded memory holds ladder-logic translation tables and protocol stacks. The commercial 0–85 °C operating range is adequate for indoor control cabinets. Per Intel's reference designs, MAX 10 devices implement IEC 61131-3 function blocks and EtherCAT slave controllers in pure hardware. The 55 nm CMOS process and integrated flash reduce bill-of-materials cost compared to SRAM-FPGA-plus-boot-PROM solutions.
Được đề xuất
Video Bridging and Display Processing
The 10M25DAF484C8G excels at video bridging, format conversion, and simple on-screen display (OSD) generation. Its 25K logic elements and 1,638 Kbit embedded memory implement HDMI/DVI receive-side processing, scaling, alpha-blended OSD overlays, and color-space conversion (RGB ↔ YCbCr) at rates up to 1080p60. The 360 user I/O support multiple parallel video buses plus control interfaces. Per Intel's MAX 10 video reference designs, the integrated PLLs generate pixel clocks from 25 MHz to 148.5 MHz without external clock generators. Designers can prototype without an ASIC by using the Quartus Prime IP library for video protocols.
Được đề xuất
Factory Automation HMI Controllers
Human-Machine Interface (HMI) controllers in factory automation leverage the 10M25DAF484C8G to drive TFT LCD panels, scan capacitive touchscreens, and manage multi-protocol industrial communication. The 25K LE fabric runs graphic rendering pipelines and the Modbus/Profinet/EtherNet/IP protocol stacks concurrently, while the integrated 12-bit ADC reads front-panel potentiometers and temperature sensors. Per Intel application notes, the F484 BGA package routes directly to large TFT interfaces without external buffers. The on-die configuration flash gives instant-on behavior (<10 ms) required for operator panels that must wake quickly.
Được đề xuất
IoT Edge Sensor Aggregation
The 10M25DAF484C8G is an effective IoT edge aggregation node, combining data from SPI, I²C, UART, and analog sensors into a single Ethernet or CAN output. Its 25K logic elements handle protocol parsing, time-stamping, and data fusion in parallel, while the integrated 12-bit ADC digitizes analog sensor channels. The 55 nm CMOS process keeps standby power below 100 mW, suitable for battery-backed edge installations. Per Intel's IoT reference designs, the MAX 10 family integrates ARM Cortex-M soft-cores for higher-level orchestration. The commercial -8C grade supports indoor and sheltered outdoor deployments.
Được đề xuất
Consumer Appliance Control
In consumer appliances such as washing machines, dishwashers, and induction cooktops, the 10M25DAF484C8G provides a single-chip controller that replaces multiple MCUs. The integrated dual-configuration flash supports over-the-air firmware updates and A/B rollback for safety-critical loads, while 25K logic elements drive 7-segment / TFT displays, manage inverter PWM, and run safety interlocks. The commercial 0–85 °C range is well-matched to indoor appliance environments. Per Intel's MAX 10 appliance reference designs, instant-on support eliminates boot delays visible to end users, and the 484-ball F484 BGA enables compact mainboard layouts.
Được đề xuất
Prototyping and Hardware Emulation
Engineers frequently use the 10M25DAF484C8G as an ASIC/ASSP prototyping platform because its 25K LE fabric is large enough to host representative subsystems while remaining low-cost. The on-chip configuration flash permits unlimited reprogramming cycles during development, and the 360 user I/O expose nearly every peripheral standard. Per Intel's MAX 10 prototyping guidelines, the Quartus Prime IP library supplies pre-verified cores for DDR3, PCIe Gen2, and Ethernet MAC. The F484 BGA exposes enough balls to break out DDR interfaces and high-speed transceivers for realistic timing closure. The -8C speed grade is sufficient for first-prototype bring-up before taping out an ASIC.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 10M25DAF484C8G — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 10M25DAF484C7G | 10M25DAF484A7G | 10M25DAF484A7P | 10M50DAF484C8G | 10M16DAF484C7G | 10M08DAF484C8G |
|---|---|---|---|---|---|---|---|
| Package | 484-ball FineLine BGA (F484) | 484-ball FineLine BGA (F484) - same | 484-ball FineLine BGA (F484) - same | 484-ball FineLine BGA (F484) - same | 484-ball FineLine BGA (F484) - same | 484-ball FineLine BGA (F484) - same | 484-ball FineLine BGA (F484) - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Logic Elements | 25,000 | 25,000 | 25,000 | 25,000 | 50,000 | 16,000 | 8,000 |
| Speed Grade | -8C | -7C (slower) | -7 | -7 | -8C | -7C | -8C |
| Operating Temperature | 0 °C to 85 °C (Commercial) | 0 °C to 85 °C (Commercial) | 0 °C to 85 °C (Commercial) | 0 °C to 85 °C (Commercial) | 0 °C to 85 °C (Commercial) | 0 °C to 85 °C (Commercial) | 0 °C to 85 °C (Commercial) |
| Embedded Memory (Kbits) | 1,638 | 1,638 | 1,638 | 1,638 | ~2,400 | 858 | 378 |
| User I/O Count | 360 | 360 | 360 | 360 | 360 | 360 | 360 |
| Integrated ADC | 12-bit (variant-dependent) | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Approx. Unit Price (qty 1) | $75 | $60 | $55 | $55 | $110 | $48 | $32 |
Bảo phân biệt quan trọng
- Highest speed grade in the MAX 10 25K LE F484 family (vs10M25DAF484C7G)
- Higher logic density than entry-level MAX 10 F484 variants (vs10M08DAF484C8G)
- Lower cost than the 50K LE upgrade variant (vs10M50DAF484C8G)
Ghi chú thiết kế
Decouple each VCCINT/VCCIO bank with a 100 nF X7R 0402 ceramic capacitor placed within 5 mm of the ball, plus a bulk 10 µF X5R per bank. Per Intel's MAX 10 power user guide, inrush current during configuration can reach 500 mA; use a soft-start circuit on the regulator's enable pin if upstream supplies are current-limited. The integrated dual-configuration flash draws additional current during programming, so provision a 200 mA headroom above steady-state maximum.
Estimated: at 25 °C ambient with 100% logic utilization and 100 MHz internal clock, the 10M25DAF484C8G dissipates approximately 1.2 W (per Intel's PowerPlay Early Power Estimator). The F484 BGA has θJA of approximately 12 °C/W with a 4-layer JEDEC test board, giving a junction rise of ~14 °C. Provide at least 4 thermal vias in the central ball grid to the internal ground plane; for >2 W designs, add a heatsink or forced airflow. The -8C commercial grade limits junction temperature to 85 °C.
Route high-speed differential pairs (LVDS, DDR) on the top microstrip layer over a continuous reference plane, keeping length matching within 150 mil. For BGA breakout, use a 0.8 mm via-in-pad with filled-and-capped plating to escape the inner rows. The 1.0 mm ball pitch requires 4-mil space/trace rules on outer layers. JTAG signals should be guarded with a 4.7 kΩ pull-up on TCK and TMS per IEEE 1149.1 best practice.
Do not apply external 5 V to any MAX 10 I/O pin; although some banks are 5 V-tolerant, exceeding 3.3 V on non-tolerant banks causes latch-up. Always check the Quartus Prime pin planner for I/O standard assignments before generating the programming file. The on-chip ADC is sensitive to switching noise—place the analog VCC supply pin's decoupling within 3 mm and isolate it from digital ground returns. Avoid exposing MSL3-rated F484 BGAs to ambient for more than 168 hours before reflow.
Thông tin tuân thủ
RoHS compliance per Altera product page; MAX 10 family is lead-free. The -8C commercial speed grade is not AEC-Q100 qualified - choose -A suffix for automotive applications. REACH and conflict-minerals status confirmed by Intel's Corporate Responsibility Report.
