1203-GD1 Remote I/O SCANport Module | Rockwell Automation
MPN: 1203-GD1 ✗ Cuối đời1203-GD1 Tóm tắt
A Remote I/O communications module is an industrial automation interface that carries digital control and data traffic between a programmable controller and compatible field equipment. In the automation hierarchy, this module connects the controller-side communication bus to SCANport equipment, helping devices exchange commands, status, and diagnostic information. Its role is communication and protocol adaptation rather than direct motion control or standalone logic execution.
The verified operating specifications emphasize deployment flexibility: the 1203-GD1 accepts 85–264 V AC, supports three listed serial data rates, and is configured through DIP switches before connection to the Remote I/O link. The Rockwell Automation 1203-GK1/1203-GD1/1336-GM1 user material identifies DIP-switch configuration as a defining feature of the module family. Its Remote I/O and SCANport interface makes it relevant to legacy Allen-Bradley industrial-control systems.
Typical applications include connecting SCANport products to Remote I/O networks, integrating AC-drive communication modules, and supporting industrial equipment that uses the 1203 communication architecture. Its wide AC input range can simplify integration where facility power varies, although installation must follow the manufacturer’s voltage, grounding, wiring, and configuration instructions. The module’s 2.01 lb weight and independent communication-module format support panel or DIN-rail-oriented automation integration.
For maintenance and replacement, verify the controller family, SCANport device compatibility, Remote I/O link configuration, DIP-switch settings, and supply voltage before installation. The module should not be treated as a universal electrical substitute merely because another communication adapter has a similar enclosure. Confirm the original equipment documentation and Rockwell Automation compatibility information, especially in mixed-generation or previously modified control systems.
Bộ thay thế dễ dàng lắp đặt cho 1203-GD1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thế1203-GD1 Thông số kỹ thuật
| Product Type | Remote I/O Communications Module |
| Communication Interface | Remote I/O / SCANport |
| Phạm vi điện áp đầu vào | 85–264 V AC |
| Tốc độ dữ liệu | 57.6 / 115.2 / 230.4 kbaud |
| Input Current | 35 mA maximum |
| Power Input | 120/240 V AC, 50/60 Hz |
| Weight | 2.01 lb |
| NEMA Rating | Type 1 |
| Configuration Method | DIP switches |
| Compatible Interface | SCANport |
| Network Role | Remote I/O link and device connectivity |
| Manufacturer | Rockwell Automation |
| Brand Association | Allen-Bradley |
| Module Format | Communication Module / PLC Module |
| Supply Phase | 1-phase |
| Environmental Rating | NEMA Type 1 |
Hướng dẫn cấu hình chân 1203-GD1 standard
Cấu hình chân cho 1203-GD1 (standard gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho 1203-GD1.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
1203-GD1 phù hợp cho 6 Áp dụngs: SCANport Device Connectivity, Legacy Allen-Bradley Control Retrofit, AC-Drive Communication Interface, Industrial Remote I/O Network, Factory Automation Spare, SCANport Product Integration.
SCANport Device Connectivity
The 1203-GD1 is appropriate for connecting SCANport-equipped industrial products to an Allen-Bradley programmable-controller architecture through a Remote I/O communication link. Its stated Remote I/O/SCANport interface and DIP-switch configuration make it suitable where the equipment documentation requires this communication path. The installer should verify the controller family, device protocol, cable routing, and switch settings before energizing the system. Because the module is a communications interface rather than a direct I/O module, downstream status and control signals still depend on the connected equipment and its configuration.
Được đề xuất
Legacy Allen-Bradley Control Retrofit
The 1203-GD1 can support maintenance or retrofit work in legacy Allen-Bradley control systems that retain SCANport and Remote I/O communication requirements. Its 85–264 V AC input range supports integration with broad facility-power conditions, while its listed communication rates allow configuration for compatible serial equipment. Retrofit work must confirm that the controller, cables, termination, grounding, and device addresses remain compatible. The module should be installed only after the original equipment topology and Rockwell documentation have been reviewed.
Được đề xuất
AC-Drive Communication Interface
The 1203-GD1 is relevant to AC-drive communication systems when the drive and controller use the compatible SCANport/Remote I/O architecture. The module provides the communication path between the control system and the connected drive product, allowing commands and status information to be exchanged through the supported network. Exact drive compatibility must be confirmed because the verified data does not identify every supported drive model. Verify protocol parameters, DIP-switch positions, cable termination, and the drive’s own configuration before commissioning.
Được đề xuất
Industrial Remote I/O Network
The 1203-GD1 can serve as an interface between an Allen-Bradley programmable controller and Remote I/O links or devices in an industrial network. Its stated data rates of 57.6, 115.2, and 230.4 kbaud provide selectable communication-speed options for compatible equipment. Network commissioning should include address, baud-rate, cable, termination, and grounding checks. The Type 1 NEMA rating indicates the verified environmental enclosure classification, but the module still needs appropriate placement and protection from the actual installation environment.
Được đề xuất
Factory Automation Spare
The 1203-GD1 is suitable as a maintenance spare for compatible Allen-Bradley SCANport and Remote I/O equipment. Its 120/240 V AC, 50/60 Hz power description and 85–264 V AC input range support comparison against the original equipment supply. A replacement should be matched not only by catalog number but also by controller generation, communication interface, DIP-switch configuration, mounting arrangement, and firmware expectations. Record the failed module’s configuration before removal to reduce commissioning risk.
Được đề xuất
SCANport Product Integration
The 1203-GD1 supports integration of SCANport-equipped products with a programmable controller by providing the Remote I/O communication interface. This makes it useful in equipment where a controller must exchange configuration, operating, or diagnostic data with a field product. The interface is not a substitute for device-specific application programming; the connected product must support the same architecture. Verify the manufacturer’s compatibility list, cable requirements, and configuration procedure before installation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 1203-GD1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Product Type | Remote I/O Communications Module |
| Brand | Rockwell Automation / Allen-Bradley |
| Input Voltage | 85–264 V AC |
| Power Rating | 120/240 V AC, 50/60 Hz |
| Input Current | 35 mA maximum |
| Data Rate | 57.6 / 115.2 / 230.4 kbaud |
| Communication Interface | Remote I/O / SCANport |
| Configuration | DIP switches |
| NEMA Rating | Type 1 |
| Weight | 2.01 lb |
| Lifecycle Status | unknown |
Bảo phân biệt quan trọng
- Dedicated Remote I/O/SCANport interface (vs1203-GK1)
- Broad listed AC input range (vs1203-GK1)
- Three listed serial data rates (vs1203-GK1)
Ghi chú thiết kế
Do not select a replacement solely by catalog-number similarity. Verify the controller family, SCANport compatibility, Remote I/O link requirements, supply voltage, cable termination, and DIP-switch configuration. The verified cross-reference results identify 1203-GK1 as related documentation, but they do not establish drop-in interchangeability. Preserve the original module’s switch positions and wiring record before removal.
Install the 1203-GD1 only within its verified 85–264 V AC input range and follow the supplied 120/240 V AC, 50/60 Hz power description. Confirm one-phase supply, protective disconnect, conductor sizing, grounding, and terminal assignments against the manufacturer’s installation instructions. Do not infer terminal functions or wiring from a similar module, because the verified data does not provide a complete pinout.
Plan the installation around the module’s stated 2.01 lb weight and the requirements of the surrounding control cabinet. Maintain the prescribed separation and routing for communication cables, power conductors, and grounding. Since operating temperature and exact mounting details are not present in the verified data, use the Rockwell Automation manual and cabinet thermal design rather than estimating allowable conditions.
Communication reliability depends on matching the configured data rate and DIP-switch settings to the connected SCANport equipment. Keep communication wiring away from high-energy switching paths, use the specified terminations, and verify cable continuity before powering the link. After installation, check for communication faults and compare the module behavior with the original equipment documentation.
Thông tin tuân thủ
The verified web data does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for the 1203-GD1. AEC-Q100 is not applicable because the product is an industrial communications module, not an automotive electronic component.
