A3P030-2VQ100 - 30K Gate ProASIC3 FPGA | Microchip
MPN: A3P030-2VQ100 ✓ Hoạt độngA3P030-2VQ100 Tóm tắt
An FPGA is a programmable digital semiconductor whose internal logic blocks and interconnects can be configured after manufacture. In the product hierarchy, the A3P030 belongs to the ProASIC3 family of FPGAs, combining reprogrammability with a single-chip implementation and small-footprint packaging. This makes it suitable for designs where a small logic volume, flexible revision timing, and low-inventory complexity matter more than the very high logic capacity of a large FPGA.
The device provides 30,000 equivalent gates, 330 logic elements, and 77 I/Os in its standard configuration. Its listed operating supply voltage is 1.5 V, while the commercial-grade A3P030-2VQ100 supports an ambient operating range from 0°C to +70°C. The 100-TQFP package uses surface-mount assembly and provides 0.5 mm terminal pitch according to the manufacturer information associated with this family. The programmable architecture also supports field updates when design logic or interface behavior needs revision.
ProASIC3 devices are based on flash-programmable FPGA technology, allowing configuration retention without continually loading an external configuration memory after programming. This architecture is useful for compact embedded controllers, industrial automation modules, communications adapters, and test equipment where a microcontroller may be too restrictive but a larger FPGA would be unnecessary. The A3P030 family is positioned as an ultra-low-density FPGA with a small package and programmable system functionality.
Typical uses include industrial control and automation logic, low-speed communications interfaces, peripheral emulation, embedded protocol handling, and general-purpose digital signal conditioning. The 77 available I/Os support connections to external memories, converters, sensors, and standard digital peripherals. For designs requiring additional temperature margin, A3P030-2VQ100I offers an industrial-temperature variant with the same 100-TQFP class of package and 330-logic-element configuration.
PCB implementation requires careful attention to the 0.5 mm pitch, power-supply integrity, configuration behavior, and exposed programming or system interfaces. Confirm the exact pin assignments, configuration requirements, decoupling values, and supported I/O standards in the manufacturer datasheet before layout. A replacement should match the package, speed grade, temperature grade, configuration scheme, and voltage requirements rather than relying only on the FPGA family name.
This component overview consolidates the confirmed ProASIC3 capacity, package, interface count, operating conditions, grade differences, and practical replacement constraints. It also supports faster engineering decisions by comparing the commercial and industrial variants on a parameter-by-parameter basis.
Bộ thay thế dễ dàng lắp đặt cho A3P030-2VQ100 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P030-2VQ100 (cùng hình factor và footprint) — khác nhau ở Package, Logic Elements, Product Type, RoHS Status, User I/O Count.
A3P030-2VQ100I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P030-VQ100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P030-VQ100I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P030-VQG100
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P030-1VQG100I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P030-2VQ100 Tỷ lệ tối đa & tính chất điện
| Product Type | ProASIC3 field-programmable gate array (FPGA) |
| Equivalent Gate Count | 30,000 gates |
| Logic Elements | 330 logic elements |
| Logic Array Blocks | 768 LABs |
| User I/O Count | 77 I/Os |
| Điện áp cung cấp hoạt động | 1.5 V |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | +70 °C |
| Speed Grade | 2 |
| Temperature Grade | Commercial |
| Hộp | 100-TQFP |
| Package Family | TQFP-100 |
| Terminal Pitch | 0.5 mm |
| Kiểu lắp đặt | SMD/SMT |
| Programming Technology | Flash-programmable |
| Số lượng chân | 100 pins |
Hướng dẫn cấu hình chân A3P030-2VQ100 tqfp-100
Cấu hình chân cho A3P030-2VQ100 (tqfp-100 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P030-2VQ100.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P030-2VQ100 phù hợp cho 6 Áp dụngs: Industrial Automation Control, Communications Interface Adapter, Programmable Peripheral Emulation, Embedded Signal Conditioning, Test and Measurement Logic, Embedded Protocol Bridge.
Industrial Automation Control
The A3P030-2VQ100 fits compact industrial automation logic that requires 77 I/Os, 330 logic elements, and programmable digital behavior in a 100-TQFP surface-mount package. It can implement sequencing, interlocks, signal routing, and machine-control logic alongside a microcontroller or processor. The commercial rating of 0°C to +70°C is appropriate for enclosure temperatures that remain within that range; use A3P030-2VQ100I when harsher ambient conditions are expected. Before layout, confirm the configuration method, supported I/O standards, power sequencing, and timing constraints in the Microchip A3P030 documentation.
Được đề xuất
Communications Interface Adapter
The A3P030-2VQ100 is suitable for a small communications interface adapter that must translate parallel or irregular digital signals into a structured protocol engine. Its 30,000 equivalent gates and 77 I/Os provide capacity for framing logic, buffers, status registers, and multiple external interfaces without a large FPGA package. The 1.5 V operating supply can align with a modern digital core rail, although signal-level and I/O compatibility must be verified. Place the device in a 100-TQFP layout with careful routing for clock, data, configuration, and low-latency control paths.
Được đề xuất
Programmable Peripheral Emulation
A3P030-2VQ100 can implement programmable glue logic, legacy peripheral emulation, test-sequence control, and protocol conversion around an application processor. The 330 logic elements and 77 I/Os provide a practical balance for medium-complexity interface logic, while flash-programmable configuration supports design revisions without changing the PCB. Because the device is a commercial-grade part rated to +70°C, it should remain within that environmental envelope or be replaced by the industrial A3P030-2VQ100I. Confirm configuration-pin behavior and asynchronous interface timing before releasing the design.
Được đề xuất
Embedded Signal Conditioning
The A3P030-2VQ100 can implement digital signal conditioning, event filtering, pulse shaping, and routing between sensors and a higher-level controller. Its programmable architecture makes it suitable for designs whose logic rules evolve after initial prototyping, and its 77 I/Os allow multiple digital channels to be connected. The 100-TQFP package with 0.5 mm terminal pitch supports compact surface-mount assemblies but demands careful escape routing for dense I/O. Validate setup and hold timing, configuration startup, and any clock-domain crossing strategy against the manufacturer timing specifications.
Được đề xuất
Test and Measurement Logic
The A3P030-2VQ100 is appropriate for programmable test logic, pattern generation, sequencing, and instrument-control functions where a microcontroller alone would make system revision cumbersome. Its 30,000 equivalent gates and 77 I/Os can support parallel digital tests and configurable measurement paths in a compact 100-TQFP device. The 1.5 V operating supply and reprogrammable architecture simplify adaptation to different test sequences. Validate input thresholds, output drive, clock quality, and configuration integrity for the instrument environment, and select the industrial grade if internal temperatures can exceed +70°C.
Được đề xuất
Embedded Protocol Bridge
The A3P030-2VQ100 can bridge incompatible digital interfaces by converting parallel data, clock domains, and protocol framing into a format consumed by an application processor. Its reprogrammable logic makes it useful for bridging revisions and product-family adaptations, while 77 I/Os provide connections to multiple buses and control signals. The commercial 0°C to +70°C rating fits controlled indoor equipment; use A3P030-2VQ100I for wider temperature requirements. Review clock tolerance, I/O voltage limits, configuration startup, and timing closure before treating the bridge as production-ready.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P030-2VQ100 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Choose A3P030-2VQ100I when the same speed and logic resources are needed across a wider industrial temperature range. Choose A3P030-VQ100 only after resolving its unspecified speed grade, and choose A3P030-VQG100 only after checking its suffix-defined options. A3P030-1VQG100I is a lower-speed industrial option that can reduce timing margin.
No cross-manufacturer replacement should be treated as drop-in without documented pin, configuration, timing, and voltage compatibility. For every proposed substitution, verify the package drawing, numbered pins, configuration behavior, electrical limits, and environmental qualification before updating the PCB or production BOM.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P030-2VQ100I | A3P030-VQ100 | A3P030-VQ100I | A3P030-VQG100 | A3P030-1VQG100I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP | 100-TQFP | 100-TQFP | 100-TQFP | 100-TQFP | 100-TQFP |
| Equivalent Gate Count | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates |
| Logic Elements | 330 logic elements | 330 logic elements | 330 logic elements | 330 logic elements | 330 logic elements | 330 logic elements |
| User I/O Count | 77 I/Os | 77 I/Os | 77 I/Os | 77 I/Os | 77 I/Os | 77 I/Os |
| Mounting Type | SMD/SMT | SMD/SMT | SMD/SMT | SMD/SMT | SMD/SMT | SMD/SMT |
Bảo phân biệt quan trọng
- Commercial speed-grade-2 configuration (vsA3P030-1VQG100I)
- Commercial temperature rating (vsA3P030-2VQ100I)
- Exact grade-2 ordering configuration (vsA3P030-VQ100)
- 77 I/Os in a compact surface-mount package (vsA3P030-1VQG100I)
Ghi chú thiết kế
Design the 100-TQFP footprint around the confirmed 0.5 mm terminal pitch and verify it against the Microchip mechanical drawing before fabrication. Keep configuration, clock, and high-fanout nets away from sensitive analog-adjacent routing, place bypass capacitors at the specified power pins, and provide unobstructed assembly access for the fine-pitch leads. Do not substitute a package solely from the VQ100 family suffix because pin functions and device options must match the exact ordering code.
Follow the manufacturer power-supply and decoupling recommendations for the 1.5 V operating rail. Separate configuration and programming activity from noise-sensitive signal paths, use local high-frequency bypass capacitance, and confirm source current limits in the device documentation. The exact capacitor values and sequencing requirements are not specified here; use the A3P030 datasheet values rather than generic bulk-capacitor rules.
Do not approve a replacement based only on the ProASIC3 family name. A3P030 ordering suffixes can identify speed grade, temperature grade, package detail, or other device options. Compare the exact suffix definitions, pinout, I/O standards, configuration method, and timing characteristics. In particular, A3P030-1VQG100I uses speed grade 1 rather than grade 2, while A3P030-2VQ100I changes the environmental qualification rather than the core speed designation.
Thông tin tuân thủ
Compliance declarations for the exact A3P030-2VQ100 ordering code were not identified. Confirm current environmental, material, and automotive-grade status directly with Microchip before release to production.