A3P125-PQ208 - 125K Gate Flash FPGA | Microchip Technology
MPN: A3P125-PQ208 ✓ Hoạt độngA3P125-PQ208 Tóm tắt
An FPGA is a programmable digital semiconductor used to implement control logic, interface bridging, signal processing and system-integration functions. In the product hierarchy, the A3P125-PQ208 is a flash-based FPGA, a programmable logic device, and a semiconductor. Its reprogrammability allows one physical device to support multiple logic configurations, while flash configuration storage supports a fast, deterministic boot sequence without an external configuration PROM.
The principal capacity specifications include 125,000 typical system gates and 3,072 configurable logic blocks, commonly identified as logic cells. The device also provides 36,864 RAM bits and 133 configurable user I/O pins. Its 208-pin package exposes substantially more interface options than the logic capacity alone might suggest, making the part suitable for designs requiring parallel buses, control signals, communications links and mixed external interfaces.
The ProASIC3 implementation uses 130 nm CMOS technology with a seven-layer metal structure containing six copper layers. This flash-based architecture places configuration data directly on the FPGA die. The large I/O count supports interface-intensive designs, while the embedded RAM permits practical state storage, buffering, packetization and small local data-processing functions without requiring separate external memory.
Typical uses include industrial control and automation, communications interface consolidation, embedded protocol handling, test and measurement equipment, security and access-control logic, and general-purpose prototyping platforms. The 133 user I/Os are particularly useful when a design must bridge legacy parallel interfaces with newer serial peripherals while retaining deterministic control over board-level signals.
Designers should assign pins from the manufacturer's package pin-assignment table, confirm bank-compatible supply voltage requirements for every external interface, and validate termination, direction and pull-up or pull-down requirements before layout. The 208-pin package also requires a controlled fanout strategy and careful decoupling across the programmable logic and I/O power domains.
This product page combines the A3P125-PQ208 capacity, package, interface and technology data with drop-in family alternatives, comparison criteria and practical PCB guidance. It is intended to help engineers confirm footprint compatibility, assess logic and I/O resources, and determine whether the ProASIC3 device fits the target system before beginning board-level implementation.
Bộ thay thế dễ dàng lắp đặt cho A3P125-PQ208 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P125-PQ208 (cùng hình factor và footprint).
A3P125-PQ208I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-PQ208Y
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-PQ208IY
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-PQ208YI
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-PQG208I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3P125-PQ208 Tỷ lệ tối đa & tính chất điện
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | ProASIC3 |
| System Gates | 125,000 gates |
| Logic Cells / Logic Blocks | 3,072 logic blocks |
| Embedded RAM | 36,864 bits |
| User I/O Pins | 133 I/Os |
| Total Package Pins | 208 pins |
| Configuration Memory | Flash-based |
| Logic Technology | 130 nm CMOS |
| Metal Layer Count | 7 layers |
| Copper Layer Count | 6 layers |
| Package Type | 208-pin plastic QFP |
| Package Dimensions | 28 x 28 mm |
| Lead Pitch | 0.50 mm |
| Package Height | 3.40 mm |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân A3P125-PQ208 3.40 mm
Cấu hình chân cho A3P125-PQ208 (3.40 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3P125-PQ208.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3P125-PQ208 phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Communications Interface Consolidation, Test and Measurement Equipment, Security and Access-Control Logic, Embedded Protocol Bridging, Rapid Prototyping and Programmable Control.
Industrial Control and Automation
The A3P125-PQ208 fits industrial control equipment that needs programmable logic, broad I/O access and modest local data storage. Its 3,072 logic cells can implement sequencing, interlocks, state machines and timing functions, while 36,864 RAM bits can support counters, buffers and sampled data. The 133 user I/Os allow the controller to connect sensors, actuators, encoders and operator interfaces without relying on several discrete logic devices. Place the FPGA near the controlled signal sources, keep clock and reset routing deterministic, and group compatible I/O standards into appropriate supply domains. The benefit is a consolidated and reprogrammable control platform; the engineering trade-off is that the 208-pin package demands careful fanout and decoupling.
Được đề xuất
Communications Interface Consolidation
A3P125-PQ208 is suitable for communications equipment that must combine parallel and serial-facing control logic into one reprogrammable device. The 3,072 logic cells provide capacity for protocol state machines, framing logic and supervisory functions, while 36,864 RAM bits can implement packet buffering or channel context. With 133 user I/Os, the device can accommodate address, data and control signals alongside configuration and status connections. Engineers should assign pins according to the manufacturer's package table and verify the voltage, direction and termination requirements of each interface. The architecture simplifies board partitioning compared with multiple fixed logic ICs, although high-speed edge-rate routing still requires controlled topology and return-path planning.
Được đề xuất
Test and Measurement Equipment
The A3P125-PQ208 can support programmable test and measurement front ends where timing, acquisition control and interface logic must be adjusted without changing the PCB. Its 125,000-gate ProASIC3 organization includes 3,072 logic cells for sequencers, trigger logic, counters and data-routing functions. The 36,864 RAM bits provide local storage for calibration tables or captured samples, while 133 user I/Os offer broad connectivity to instruments and DUT fixtures. A practical implementation should reserve dedicated clock, reset and configuration resources, use the pin-assignment table for every bank, and validate signal integrity at the required edge rates. The main advantage is reconfigurability; the trade-off is that high fanout can make routing and timing closure more demanding than in a small CPLD.
Được đề xuất
Security and Access-Control Logic
A3P125-PQ208 can serve as the programmable control element in access-control, alarm and physical-security systems requiring multiple inputs and deterministic outputs. The 3,072 logic cells can manage credential-state machines, event sequencing, timers and alarm policies, while the 36,864 RAM bits can retain short event histories or configuration state. Its 133 user I/Os suit door sensors, request-to-exit inputs, relay controls, indicators and communication links. Since the device uses flash-based configuration, startup behavior can be deterministic without a separate configuration PROM. Engineers should verify suffix-specific operating limits and implement appropriate external protection if any security-critical decision must not rely solely on the programmable fabric.
Được đề xuất
Embedded Protocol Bridging
A3P125-PQ208 is appropriate for legacy-to-modern protocol bridging where parallel device interfaces must be translated into a different bus or data format. The FPGA's 3,072 logic cells support protocol state machines, byte packing, timing controls and error handling, while 36,864 RAM bits can buffer short transactions. The 133 user I/Os allow several legacy peripherals to remain connected even when one side of the system has moved to a serial interface. Pin assignment should follow electrical-bank compatibility, and high-speed inputs must use controlled routing away from clock and configuration signals. The benefit is field-programmable adaptation without a PCB respin; the trade-off is that protocol timing margins and clock-domain crossings must be verified carefully during implementation.
Được đề xuất
Rapid Prototyping and Programmable Control
A3P125-PQ208 supports rapid prototyping because the flash-based ProASIC3 configuration can be reprogrammed as interface requirements evolve. A designer can use its 125,000 system gates and 3,072 logic cells for control blocks, experimental algorithms and interface adaptation, with 36,864 RAM bits for working data structures. The 133 user I/Os make it possible to connect processors, memory, converters and test points on a reusable platform. A successful prototype should separate clocks, resets and power domains early and preserve optional footprint flexibility for later routing changes. Compared with a hard-wired ASIC, the FPGA allows configuration revisions and functional corrections; compared with a smaller programmable device, it requires more attention to pin planning and package fanout.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P125-PQ208 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P125-PQ208I | A3P125-PQ208Y | A3P125-PQ208IY | A3P125-PQ208YI |
|---|---|---|---|---|---|
| Package | 208-pin plastic QFP, 28 x 28 mm, 0.50 mm pitch | 208-pin plastic QFP, 28 x 28 mm, 0.50 mm pitch | 208-pin plastic QFP, 28 x 28 mm, 0.50 mm pitch | 208-pin plastic QFP, 28 x 28 mm, 0.50 mm pitch | 208-pin plastic QFP, 28 x 28 mm, 0.50 mm pitch |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates | 125,000 gates |
| Logic Cells / Logic Blocks | 3,072 logic blocks | 3,072 logic blocks | 3,072 logic blocks | 3,072 logic blocks | 3,072 logic blocks |
| Embedded RAM | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits |
| User I/O | 133 I/Os | 133 I/Os | 133 I/Os | 133 I/Os | 133 I/Os |
| Configuration Memory | Flash-based | Flash-based | Flash-based | Flash-based | Flash-based |
| Process Technology | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS | 130 nm CMOS |
| Total Pins | 208 pins | 208 pins | 208 pins | 208 pins | 208 pins |
Bảo phân biệt quan trọng
- Large user-I/O count for logic consolidation (vsA3P125-PQ208I)
- Consistent 208-pin footprint across identified family options (vsA3P125-PQ208Y)
- Flash-based nonvolatile configuration (vsA3P125-PQ208IY)
Ghi chú thiết kế
Begin with the manufacturer's 208-pin package pin-assignment table and partition all signals by voltage domain, direction and timing requirement before placing components. The package uses a 0.50 mm lead pitch, so maintain consistent escape routing and adequate solder-mask and copper clearances for fine-pitch assembly. Place configuration, clock and reset pins before prioritizing convenience-oriented I/O, then route clocks as dedicated nets with short returns.
Follow the exact suffix power architecture rather than applying a single rail set to every A3P125 ordering option. Place core and I/O decoupling capacitors at their assigned supply pins, with short ground returns and a low-impedance distribution plane. Validate the final design across core-clock activity and maximum intended I/O utilization; unused I/O standards and switching states can affect current even when the logic fabric is lightly loaded.
Plan the PCB for deterministic clock distribution and predictable interface routing. The 3,072 logic blocks and 133 user I/Os provide flexibility, but dense external connections can still produce difficult fanout. Use the preferred package pins for clocks, resets and configuration signals, avoid routing noisy or high-current switching nodes beneath sensitive programmable logic, and include test points for configuration and major interface buses.
Do not treat the similarly named A3P125 package variants as interchangeable without checking the complete ordering code. A3P125-PQ208I, A3P125-PQ208Y and their combined suffix forms retain the same 208-pin resource architecture, but suffix attributes may control temperature range or qualification. Verify the electrical tables, package drawing and configuration compatibility for the exact replacement before releasing production artwork.
Thông tin tuân thủ
The exact A3P125-PQ208 compliance declarations were not identified. Verify the current manufacturer product declaration and product-label documentation before treating this part as compliant with a specific environmental or automotive requirement.
