AD534KDZ - 4-Quadrant Precision Multiplier | Analog Devices
MPN: AD534KDZ ✓ Hoạt độngAD534KDZ Tóm tắt
An analog multiplier is a specialized analog-function integrated circuit that scales one input signal by another. Multiplication is common in gain control, signal normalization, modulation, automatic-range measurement, and closed-loop industrial control. A four-quadrant multiplier can multiply positive and negative input combinations, while the divider configuration supports precision ratio calculations. Within the broader semiconductor hierarchy, the AD534 is an analog signal-processing IC, a multiplier/divider, and ultimately an amplifier-class integrated circuit used to condition and control continuous-valued signals.
Key device attributes include four-quadrant operation, monolithic construction, internal laser trimming, and a 14-CDIP package. Internal trimming calibrates the multiplier during manufacture, improving consistency between units and reducing the need for external adjustment. The monolithic implementation also keeps the multiplier and associated circuitry on one semiconductor die, supporting repeatable performance in analog instrumentation designs. ADI identifies the AD534 family as production products and describes it as an internally trimmed precision IC multiplier/divider.
The AD534's architecture makes it useful where a computed analog quantity must be produced directly rather than implemented with a sequence of discrete op-amp stages. Compared with a digital multiplication approach, an analog multiplier can operate on continuously varying signals without first converting them into digital words. This reduces conversion latency and avoids quantization error, although the surrounding system must still manage offsets, temperature effects, reference accuracy, and downstream signal scaling.
Typical applications include precision gain and attenuation control, laboratory and test instrumentation, process-control loops, analog signal normalization, modulation and demodulation blocks, and measurement systems that multiply a sensed quantity by a calibration factor. In an instrumentation design, the AD534 can scale a bridge or sensor output by a programmable control voltage, while in a divider configuration it can generate a proportional ratio for feedback or measurement stages.
When laying out the board, treat the analog inputs, reference path, and output as a matched precision network. Keep sensitive signal traces short, avoid sharing return-current paths with switching circuitry, and use stable bypass capacitance at the device pins. Confirm the complete pin assignments and recommended operating conditions in the manufacturer data sheet before final routing, especially when the multiplier operates near its input or output limits.
Bộ thay thế dễ dàng lắp đặt cho AD534KDZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD534KDZ (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Product Type, RoHS Status.
AD534KD
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD534JD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD534TD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD534KDZ Tỷ lệ tối đa & tính chất điện
| Product Type | Analog Multiplier/Divider |
| Operating Quadrants | 4 quadrants |
| Construction | Monolithic |
| Calibration Method | Internal laser trimming |
| Hộp | 14-CDIP |
| Package Body Width | 0.300 inch (7.62 mm) |
| Kiểu lắp đặt | Through-hole |
Hướng dẫn cấu hình chân AD534KDZ 0.300 inch (7.62 mm)
Cấu hình chân cho AD534KDZ (0.300 inch (7.62 mm) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD534KDZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD534KDZ phù hợp cho 6 Áp dụngs: Precision Analog Gain Control, Process-Control Proportional Paths, Instrumentation Signal Scaling, Analog Modulation and Signal Shaping, Precision Ratio Measurement, Laboratory and Test Equipment Signal Conditioning.
Precision Analog Gain Control
The AD534KDZ fits precision analog gain-control blocks because its four-quadrant multiplier function can scale a signal by a positive or negative control voltage. Placing it in the forward path avoids digital conversion and the associated quantization error, while internal laser trimming improves consistency between units. In a closed loop, the multiplier can convert a level error into an adjustment command, but the design must keep reference and control signals stable and provide suitable input drive. Confirm the exact accuracy grade and signal-amplitude limits in the manufacturer data sheet before fixing the gain range.
Được đề xuất
Process-Control Proportional Paths
The AD534KDZ is appropriate for proportional paths in analog process control because multiplication directly converts a measurement-error signal into a control quantity. The four-quadrant capability supports both increasing and decreasing correction, and the monolithic trimmed implementation gives repeatable behavior across multiple production units. It is particularly useful where a control output must follow a continuous variable without repeated analog-to-digital conversion. The surrounding loop still requires isolation, filtering, actuator drive, and compliance with the plant's environmental and safety requirements.
Được đề xuất
Instrumentation Signal Scaling
The AD534KDZ can scale a low-level sensor or bridge-derived signal by a calibration factor in precision instrumentation. Direct analog multiplication retains the signal continuously and avoids the latency and resolution loss of a digital multiplication stage. Internal laser trimming is valuable when measurement repeatability must remain consistent from one instrument to the next. For best performance, use clean reference connections, short analog traces, and separate return paths for the multiplier and downstream converter so ground current does not add error to the measured product.
Được đề xuất
Analog Modulation and Signal Shaping
The AD534KDZ supports modulation and signal-shaping circuits where a waveform must be multiplied by a changing control signal. Four-quadrant operation allows both positive and negative control polarities, expanding the usable modulation range without changing the core multiplier topology. Since the device works in the analog domain, it can preserve signal phase and amplitude relationships without clocked conversion latency. Practical designs should limit control-signal bandwidth as required by the frequency-response data sheet and isolate sensitive inputs from clocking and switching sources.
Được đề xuất
Precision Ratio Measurement
The AD534KDZ is suitable for analog ratio-measurement systems that need one input continuously divided or scaled by another. Its monolithic trimmed multiplier/divider implementation produces a proportional analog result without requiring a dedicated digital divider. The approach is useful for calibration, normalization, and feedback circuits where the measurement itself must remain analog. Accurately setting the result depends on clean references and appropriate input impedance, so follow the manufacturer pinout and input-biasing guidance rather than treating the device as an ideal mathematical element.
Được đề xuất
Laboratory and Test Equipment Signal Conditioning
The AD534KDZ fits laboratory and test-equipment signal-conditioning paths where an analog channel must be scaled by a programmed or operator-selected factor. Four-quadrant multiplication simplifies positive and negative control handling, while the trimmed monolithic design reduces unit-to-unit calibration variation. In an instrument, the multiplier can combine a reference level with a measurement signal before digitization or comparison with a threshold. Layout should prioritize analog signal integrity, low-noise references, and symmetric connections around the ceramic DIP footprint.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD534KDZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD534KD | AD534JD | AD534TD |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 14-CDIP | 14-CDIP | 14-CDIP | 14-CDIP |
| Product Type | Analog Multiplier/Divider | Analog Multiplier/Divider | Analog Multiplier/Divider | Analog Multiplier/Divider |
| Operating Quadrants | 4 quadrants | 4 quadrants | 4 quadrants | 4 quadrants |
| Calibration Method | Internal laser trimming | Internal laser trimming | Internal laser trimming | Internal laser trimming |
| Construction | Monolithic | Monolithic | Monolithic | Monolithic |
Bảo phân biệt quan trọng
- Four-quadrant analog operation in a production family (vsAD534JD)
- Monolithic internal laser trimming (vsAD534KD)
- Direct analog multiplication without conversion latency (vsAD534TD)
Ghi chú thiết kế
Treat the AD534KDZ analog inputs, reference connections, and output as a precision matched network. Route them with short, direct traces and provide a quiet return path for each signal. Place input and output bypass capacitors close to their associated device pins, and keep switching-regulator nodes and high-current output paths away from the multiplier inputs. The 14-CDIP footprint should follow the manufacturer drawing because ceramic-DIP dimensions and lead spacing must align correctly with the PCB holes.
Use a clean, low-noise reference source and verify input drive against the AD534 data sheet before entering layout. Four-quadrant operation does not remove the need for balanced biasing or adequate source impedance. If the multiplier processes a high-speed waveform, confirm both slew-rate and frequency-response limits and keep the control input physically separated from sensitive multiplier channels. Grounding schemes should prevent downstream converter current from flowing through the analog output reference.
Do not substitute an AD534 ordering code based only on the family name. The AD534KD, AD534JD, and AD534TD candidates require verification of package, temperature grade, accuracy, and electrical limits against the manufacturer's product-selection table. The same caution applies to cross-brand devices: a functionally similar multiplier is not a drop-in replacement unless its pinout, supply requirements, bandwidth, and output characteristics match exactly.
Thông tin tuân thủ
The verified product information identifies the AD534 as a production Analog Devices part but does not state RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status. Automotive qualification is not indicated for this product entry.