AD7383-4BCPZ - 16-Bit Quad SAR ADC 2MSPS | Analog Devices
MPN: AD7383-4BCPZ ✓ Hoạt độngAD7383-4BCPZ Tóm tắt
An ADC (analog-to-digital converter) is a device that converts continuous analog signals into discrete digital values. The AD7383-4BCPZ is a SAR ADC, which uses a binary search algorithm to determine the digital output, offering a good balance of speed, resolution, and power consumption. SAR ADCs are widely used in data acquisition systems, motor control, and power monitoring due to their high accuracy and low latency.
Key features of the AD7383-4BCPZ include four pseudo-differential input channels, a buffered internal 2.5 V reference, and an optional external reference up to 3.3 V. It also features an on-chip oversampling block that can improve dynamic range and reduce noise at lower bandwidths, boosting up to two bits of added resolution. The device supports SPI interface with a 4 MHz clock, and includes a FIFO buffer, soft reset, and power-on reset functions.
The AD7383-4BCPZ is pin-compatible with the 14-bit AD7384-4, allowing easy upgrades without PCB redesign. It offers a signal-to-noise ratio (SNR) of 86.7 dB and a typical power consumption of 200 µA, making it ideal for battery-powered and high-density systems. The device operates over a temperature range of -40°C to +125°C, suitable for harsh environments.
Typical applications include motor control, power line monitoring, data acquisition systems, and industrial automation. The simultaneous sampling capability ensures accurate phase alignment between channels, which is critical for three-phase motor control and power quality analysis.
When designing with this ADC, ensure proper decoupling of the power supply and reference pins, and use a low-noise reference for optimal performance. The SPI interface should be isolated if used in noisy industrial environments.
Bộ thay thế dễ dàng lắp đặt cho AD7383-4BCPZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD7383-4BCPZ (cùng hình factor và footprint) — khác nhau ở Package, Resolution, Input Type, Reference Type, Sampling Rate.
AD7384-4BCPZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD7383-4BCPZ-RL
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD7383-4BCPZ-RL7
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADS8354
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
AD7380-4BCPZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
AD7383-4BCPZ Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bits |
| Number of Channels | 4 |
| Tỷ lệ lấy mẫu | 2 MSPS |
| Input Type | Pseudo-differential |
| Giao diện | SPI |
| Điện áp cung cấp | 3.0 V to 3.3 V |
| Internal Reference | 2.5 V buffered |
| External Reference Range | Up to 3.3 V |
| SNR | 86.7 dB |
| Power Consumption | 200 µA typical |
| Khoảng nhiệt độ hoạt động | -40°C to +125°C |
| Hộp | 24-LFCSP (4x4 mm) |
| Kiểu lắp đặt | Surface Mount |
| Oversampling | Up to 2 bits added resolution |
| RoHS | Compliant |
Cấu hình chân AD7383-4BCPZ
| Chân 1 | AVDD — Analog power supply |
| Chân 2 | AIN0+ — Positive analog input channel 0 |
| Chân 3 | AIN0- — Negative analog input channel 0 |
| Chân 4 | AIN1+ — Positive analog input channel 1 |
| Chân 5 | AIN1- — Negative analog input channel 1 |
| Chân 6 | AIN2+ — Positive analog input channel 2 |
| Chân 7 | AIN2- — Negative analog input channel 2 |
| Chân 8 | AIN3+ — Positive analog input channel 3 |
| Chân 9 | AIN3- — Negative analog input channel 3 |
| Chân 10 | REFIN/REFOUT — Reference input/output |
| Chân 11 | GND — Ground |
| Chân 12 | DVDD — Digital power supply |
| Chân 13 | SCLK — Serial clock input |
| Chân 14 | SDI — Serial data input |
| Chân 15 | SDO — Serial data output |
| Chân 16 | CS — Chip select |
| Chân 17 | CNVST — Conversion start |
| Chân 18 | BUSY — Busy indicator |
| Chân 19 | RESET — Reset input |
| Chân 20 | PDR — Power-down reset |
| Chân 21 | VIO — I/O supply voltage |
| Chân 22 | GND — Ground |
| Chân 23 | AVDD — Analog power supply |
| Chân 24 | EP — Exposed pad (thermal) |
Ứng dụng tiêu biểu
AD7383-4BCPZ phù hợp cho 6 Áp dụngs: Motor Control, Power Line Monitoring, Data Acquisition Systems, Industrial Automation, Automotive Battery Management, Medical Imaging.
Motor Control
The AD7383-4BCPZ's quad simultaneous sampling capability ensures accurate phase alignment between current and voltage measurements, which is critical for three-phase motor control. Its 2 MSPS throughput and 16-bit resolution enable precise feedback loops, improving torque and efficiency. The device operates from 3.0 V to 3.3 V, compatible with typical DSP supply rails. Its low power consumption of 200 µA is beneficial in power-sensitive designs. The SPI interface simplifies connection to motor control processors. The wide temperature range of -40°C to +125°C suits industrial environments.
Được đề xuất
Power Line Monitoring
The AD7383-4BCPZ is ideal for power line monitoring due to its simultaneous sampling of multiple phases, ensuring accurate phase relationships for power quality analysis. Its 16-bit resolution and 86.7 dB SNR provide high accuracy for voltage and current measurements. The device's 2 MSPS sampling rate captures harmonics up to the Nyquist frequency. The internal 2.5 V reference simplifies design, while the SPI interface allows easy data transfer to a host processor. The wide temperature range supports outdoor installation. Low power consumption is advantageous for remote monitoring nodes.
Được đề xuất
Data Acquisition Systems
The AD7383-4BCPZ is well-suited for data acquisition systems requiring high-speed, multi-channel simultaneous sampling. Its 16-bit resolution and 2 MSPS throughput enable accurate capture of fast transients. The pseudo-differential inputs reject common-mode noise, improving signal integrity. The device's SPI interface simplifies integration with microcontrollers and FPGAs. The compact 24-LFCSP package saves board space. The internal reference reduces external component count. The device's low power consumption is beneficial for portable DAQ devices. The wide temperature range allows use in various environments.
Được đề xuất
Industrial Automation
In industrial automation, the AD7383-4BCPZ provides precise analog-to-digital conversion for process control and monitoring. Its quad channels allow simultaneous sampling of multiple sensors, reducing latency. The 16-bit resolution ensures high accuracy, while the 2 MSPS speed handles fast-changing signals. The device's robust temperature range and low power consumption make it suitable for factory floor environments. The SPI interface enables easy connection to PLCs and industrial controllers. The internal reference simplifies design, and the compact package fits space-constrained modules.
Được đề xuất
Automotive Battery Management
The AD7383-4BCPZ is suitable for automotive battery management systems (BMS) due to its high accuracy and wide temperature range. It can monitor multiple cell voltages simultaneously, ensuring precise state-of-charge estimation. The 16-bit resolution and 86.7 dB SNR provide accurate measurements. The device operates from 3.0 V to 3.3 V, compatible with automotive power rails. Its low power consumption is critical for battery-powered systems. The SPI interface allows communication with the BMS controller. The compact package is ideal for space-constrained automotive modules.
Được đề xuất
Medical Imaging
The AD7383-4BCPZ can be used in medical imaging systems where high-speed, multi-channel data acquisition is required. Its 16-bit resolution and 2 MSPS sampling rate enable accurate digitization of sensor signals. The simultaneous sampling ensures temporal alignment across channels, which is crucial for imaging. The device's low power consumption is beneficial for portable medical devices. The compact package allows integration into space-limited equipment. The wide temperature range supports various operating conditions. The SPI interface simplifies connection to image processing units.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD7383-4BCPZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD7384-4BCPZ | AD7383-4BCPZ-RL | ADS8354 |
|---|---|---|---|---|
| Package | 24-LFCSP (4x4 mm) | 24-LFCSP (4x4 mm) | 24-LFCSP (4x4 mm) | 24-LFCSP (4x4 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Resolution | 16 bits | 14 bits | 16 bits | 16 bits |
| Number of Channels | 4 | 4 | 4 | 2 |
| Sampling Rate | 2 MSPS | 2 MSPS | 2 MSPS | 2 MSPS |
| Supply Voltage | 3.0 V to 3.3 V | 3.0 V to 3.3 V | 3.0 V to 3.3 V | 2.7 V to 5.5 V |
| SNR | 86.7 dB | 80 dB | 86.7 dB | 91 dB |
| Power Consumption | 200 µA | 200 µA | 200 µA | 15 mW |
Bảo phân biệt quan trọng
- Quad simultaneous sampling (vsADS8354)
- Pin-compatible with 14-bit AD7384-4 (vsAD7384-4BCPZ)
- Low power consumption (vsADS8354)
Ghi chú thiết kế
Ensure clean power supply for AVDD and DVDD. Use low-dropout regulators (LDOs) with low noise output, and place 0.1 µF and 10 µF decoupling capacitors close to the power pins. The AD7383-4BCPZ operates from 3.0 V to 3.3 V, so a stable supply is critical for maintaining SNR and linearity.
For optimal performance, use a solid ground plane and separate analog and digital ground areas. Place the ADC close to the signal source to minimize trace length and noise pickup. Use differential routing for the analog inputs to maintain pseudo-differential performance. The exposed pad should be soldered to the ground plane for thermal and electrical stability.
Avoid driving the analog inputs beyond the supply rails, as this can cause latch-up or damage. Ensure the reference voltage is stable and low-noise; use a precision reference like the ADR4525 for best performance. The SPI interface should be isolated if used in noisy industrial environments to prevent data corruption.
Thông tin tuân thủ
RoHS compliant per JLCPCB listing. Other compliance data not specified in provided sources.