AD7390BCPZ - 12-Bit Serial DAC, 3V Supply | Analog Devices
MPN: AD7390BCPZ ✓ Hoạt độngAD7390BCPZ Tóm tắt
A digital-to-analog converter (DAC) is an electronic component that converts digital binary data into an analog voltage or current. The AD7390 is a voltage-output DAC, meaning it directly outputs a voltage proportional to the digital input code. It is part of the broader family of data converters, which also includes analog-to-digital converters (ADCs). DACs are essential in systems where digital processing must interface with the analog world, such as audio playback, motor control, and sensor calibration.
Key features of the AD7390BCPZ include 12-bit resolution, a serial interface compatible with SPI/QSPI/MICROWIRE, and a buffered output that can drive capacitive loads. The device includes a power-on reset that clears the output to zero scale, ensuring predictable startup behavior. The low supply current of less than 100 µA extends battery life in portable devices. The LFCSP package is lead-free and RoHS compliant, meeting modern environmental standards.
Technically, the AD7390 uses a resistor-string architecture with an output buffer amplifier. The serial interface allows easy connection to microcontrollers and DSPs with minimal pin count. The device supports a wide operating temperature range of -40°C to +85°C, suitable for industrial environments. The output voltage range is 0 V to VREF, where VREF can be set externally up to the supply voltage. The DAC's settling time is typically 10 µs, enabling moderate-speed applications.
Typical applications include digital gain and offset adjustment, programmable voltage references, and industrial process control. In portable instrumentation, the low power consumption is critical for extending battery life. The AD7390BCPZ is also used in automotive electronics for sensor calibration and in communication systems for bias control.
When designing with the AD7390BCPZ, ensure that the reference voltage is stable and well-decoupled to achieve full 12-bit accuracy. The serial clock should be kept clean to avoid data corruption. The output buffer can drive up to 100 pF capacitive load without oscillation, but for larger loads, an external buffer may be required.
Bộ thay thế dễ dàng lắp đặt cho AD7390BCPZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD7390BCPZ (cùng hình factor và footprint) — khác nhau ở Package, Resolution, Settling Time, Interface Type, Power-Down Current.
AD7391BCPZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →AD7390BCPZ Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 12 bits |
| Number of Channels | 1 |
| Supply Voltage Range | +2.7 V to +5.5 V |
| Điện áp cung cấp | < 100 µA |
| Kiểu đầu ra | Voltage - Buffered |
| Khoảng điện áp đầu ra | 0 V to VREF |
| Settling Time | 10 µs (typical) |
| Giao diện | SPI, QSPI, MICROWIRE |
| Reference Type | External |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 8-Lead LFCSP (3mm x 3mm) |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
| Lead-Free | Yes |
| Power-On Reset | Output to Zero Scale |
Cấu hình chân AD7390BCPZ
| Chân 1 | VOUT — Analog output voltage |
| Chân 2 | GND — Ground |
| Chân 3 | VDD — Positive supply voltage |
| Chân 4 | VREF — Reference voltage input |
| Chân 5 | SYNC — Active low chip select |
| Chân 6 | SCLK — Serial clock input |
| Chân 7 | SDIN — Serial data input |
| Chân 8 | NC — No connect |
Ứng dụng tiêu biểu
AD7390BCPZ phù hợp cho 6 Áp dụngs: Portable Instrumentation, Industrial Process Control, Automotive Electronics, Communication Systems, Medical Devices, Test and Measurement.
Portable Instrumentation
The AD7390BCPZ's ultra-low supply current of less than 100 µA and wide supply range of +2.7 V to +5.5 V make it ideal for battery-powered instruments. It provides precise analog output for sensor calibration and offset adjustment while extending battery life. The small 8-lead LFCSP package saves board space in handheld devices. Its serial interface minimizes pin count, simplifying connection to low-power microcontrollers.
Được đề xuất
Industrial Process Control
In industrial environments, the AD7390BCPZ provides accurate analog outputs for controlling valves, actuators, and setpoints. Its industrial temperature range of -40°C to +85°C ensures reliable operation in harsh conditions. The 12-bit resolution allows fine adjustments, and the serial interface enables easy integration with PLCs and industrial microcontrollers. The low power consumption reduces heat generation in control cabinets.
Được đề xuất
Automotive Electronics
The AD7390BCPZ is suitable for automotive applications such as sensor calibration and battery management systems. Its wide supply voltage range accommodates automotive power rails that vary with load and temperature. The low power consumption is beneficial for always-on modules. The device's small footprint and serial interface simplify PCB design in space-constrained automotive ECUs.
Được đề xuất
Communication Systems
In communication equipment, the AD7390BCPZ can be used for bias control and gain adjustment in RF and baseband circuits. Its fast settling time of 10 µs supports dynamic adjustments. The low noise and high accuracy ensure minimal signal distortion. The serial interface allows easy configuration via a host processor, and the small package is ideal for dense circuit boards.
Được đề xuất
Medical Devices
The AD7390BCPZ is used in medical devices such as patient monitors and diagnostic equipment for precise voltage generation. Its low power consumption is critical for battery-operated portable medical devices. The wide operating temperature range ensures reliability in clinical environments. The small package and serial interface facilitate compact, low-cost designs.
Được đề xuất
Test and Measurement
The AD7390BCPZ is ideal for test equipment requiring programmable voltage references and calibration sources. Its 12-bit resolution and low drift provide accurate and stable outputs. The serial interface enables remote programming, and the low power consumption reduces thermal drift. The compact package allows high channel density in multi-channel instruments.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD7390BCPZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD7391BCPZ | AD5300BRTZ | DAC121S101CIMK | MCP4921-E/SN |
|---|---|---|---|---|---|
| Package | 8-Lead LFCSP | 8-Lead LFCSP | SOT-23-6 | SOT-23-6 | SOIC-8 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Microchip Technology |
| Resolution | 12 bits | 10 bits | 8 bits | 12 bits | 12 bits |
| Supply Voltage Range | +2.7 V to +5.5 V | +2.7 V to +5.5 V | +2.7 V to +5.5 V | +2.7 V to +5.5 V | +2.7 V to +5.5 V |
| Supply Current | < 100 µA | < 100 µA | 140 µA | 170 µA | 350 µA |
| Settling Time | 10 µs | 10 µs | 8 µs | 10 µs | 4.5 µs |
| Interface | SPI, QSPI, MICROWIRE | SPI, QSPI, MICROWIRE | SPI | SPI | SPI |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | -40°C to +105°C | -40°C to +105°C | -40°C to +125°C |
Bảo phân biệt quan trọng
- Ultra-low supply current of less than 100 µA (vsMCP4921-E/SN)
- Wide supply voltage range of +2.7 V to +5.5 V (vsDAC121S101CIMK)
- Compact 8-lead LFCSP package (vsAD5300BRTZ)
Ghi chú thiết kế
The AD7390BCPZ operates from a single supply of +2.7 V to +5.5 V. To achieve full 12-bit accuracy, ensure the supply is clean and well-decoupled. Place a 0.1 µF ceramic capacitor close to the VDD pin and a 1 µF tantalum capacitor nearby. The reference voltage (VREF) should also be decoupled with a 0.1 µF capacitor to minimize noise.
For optimal performance, keep the analog output trace short and away from digital signals. Use a ground plane to minimize noise coupling. The LFCSP package has an exposed pad that should be soldered to the PCB ground for thermal and electrical performance. Ensure proper solder mask openings for the pad.
One common mistake is driving the output with a load that exceeds the buffer's capability. The output can drive up to 100 pF capacitive load; for larger loads, use an external buffer. Also, ensure the serial clock is clean and free of glitches to avoid data corruption. The SYNC pin must be held low during data transfer and brought high after the last bit.
Thông tin tuân thủ
RoHS compliant and lead-free per Analog Devices product page. Other compliance data not specified in provided sources.
