AD8002ARM - Dual High-Speed Amplifier | Analog Devices
MPN: AD8002ARM ✓ Hoạt độngAD8002ARM Tóm tắt
The AD8002 combines two independent amplifiers in one compact surface-mount package. Analog Devices describes it as a dual low-power, high-speed amplifier with unique transimpedance linearization circuitry. That circuitry supports cleaner drive into capacitive and back-terminated video loads while preserving useful bandwidth. A distributor listing also identifies the AD8002ARM as a dual current-feedback amplifier in an 8-MSOP package, confirming the two-channel architecture and surface-mount implementation.
Low power consumption is a central feature because two channels are integrated into one package. This makes the AD8002ARM useful in compact analog systems where channel count, board area, and amplifier overhead must be balanced. The dual arrangement also reduces the number of separate amplifier packages and can simplify PCB routing when two related signals must be processed with matched devices. The manufacturer identifies ±5 V operation as the principal supply condition.
The current-feedback topology is especially relevant to video and transimpedance-style signal paths. Unlike a purely voltage-feedback amplifier, a current-feedback amplifier can maintain useful bandwidth at higher closed-loop gains, depending on the feedback network and load. The AD8002's transimpedance linearization circuitry is intended to improve gain and phase behavior when driving video loads. Designers should still account for gain-bandwidth interaction, output-swing limits, load capacitance, and the selected feedback resistor values.
Typical uses include video signal conditioning, instrumentation, communications, active filtering, and low-to-moderate-power analog processing. Two channels can serve complementary signal paths, such as a signal and its reference, or can amplify two related inputs in a multi-channel measurement system. The 8-MSOP package is also useful for reducing board area in space-constrained equipment.
When laying out an AD8002ARM circuit, keep each amplifier's feedback components close to their associated pins and provide a low-impedance return for each supply rail. Decoupling capacitors should be placed directly across the supply pins, while unused or reserved pins must be handled according to the manufacturer pinout. Stable operation with capacitive loads may require an isolation resistor between the amplifier output and the load.
This product page combines manufacturer descriptions, package information, lifecycle sourcing details, application guidance, and cross-reference findings. It also distinguishes documented characteristics from parameters that require confirmation from the AD8002 datasheet or a current manufacturer quotation, helping engineers move from general amplifier selection to PCB-level implementation.
Bộ thay thế dễ dàng lắp đặt cho AD8002ARM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếAD8002ARM Tỷ lệ tối đa & tính chất điện
| Number of Amplifier Channels | 2 channels |
| Architecture | Dual current-feedback amplifier |
| Manufacturer Design Supply | ±5 V |
| Listed Supply Range | ±3 V to ±6 V |
| Listed Maximum Total Supply | 12 V |
| Transimpedance Linearization Circuitry | Yes |
| Hộp | 8-pin MSOP |
| Alternative Package Description | 8-TSSOP, 3.00 mm width |
| Package Width | 3.00 mm |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tube |
| Số lượng chân | 8 pins |
| Product Class | Instrumentation, operational amplifiers, and buffer amplifiers |
| Low-Power Operation | Yes |
| High-Speed Operation | Yes |
Hướng dẫn cấu hình chân AD8002ARM 3.00 mm
Cấu hình chân cho AD8002ARM (3.00 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD8002ARM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD8002ARM phù hợp cho 6 Áp dụngs: Video Signal Conditioning, Instrumentation Signal Paths, Communications Signal Conditioning, Active Filtering, Data Acquisition Front Ends, Industrial Control and Monitoring.
Video Signal Conditioning
The AD8002ARM fits video signal-conditioning stages that require two high-speed channels in one 8-pin MSOP package. Analog Devices identifies the transimpedance linearization circuitry as a method for improving differential gain and phase performance when driving video loads. One channel can condition the active video signal while the other handles a related reference or buffered path, reducing package count. The design must still be checked against the target video standard, load impedance, gain, output swing, and stability requirements before release to production.
Được đề xuất
Instrumentation Signal Paths
The AD8002ARM can serve two instrumentation channels when the system needs a compact high-speed dual amplifier rather than separate single-channel packages. Its two current-feedback amplifiers allow related sensor or measurement signals to be processed with matched device characteristics, while the manufacturer describes the AD8002 as low power and high speed. Because instrumentation accuracy also depends on bias current, input noise, offset, and common-mode range, engineers should obtain the complete electrical tables and confirm those parameters against the sensor interface before selecting it.
Được đề xuất
Communications Signal Conditioning
The AD8002ARM is applicable to communications signal paths where compactness, two channels, and high-speed amplification are more important than general-purpose precision operation. Its current-feedback architecture and transimpedance linearization make it a candidate for conditioning signals that drive terminated or reactive loads. The dual package can process a signal and monitor path without using two separate amplifier ICs. Engineers should establish the required gain, channel bandwidth, output swing, and termination before layout, because the high-speed operating point makes component placement and return-path control important.
Được đề xuất
Active Filtering
The two channels in the AD8002ARM can implement active filter sections when a design needs matched, high-speed amplification and compact surface-mount construction. Current-feedback amplifiers can maintain useful bandwidth at higher gains than a conventional voltage-feedback topology, making the device relevant to moderate-bandwidth filter stages. Filter component selection must be based on the AD8002's actual gain-bandwidth interaction, noise, and stability behavior. Include suitable feedback resistors and check whether capacitive loading requires an output isolation resistor.
Được đề xuất
Data Acquisition Front Ends
AD8002ARM can provide compact dual-channel amplification ahead of data-acquisition circuitry when low power and high speed are priorities. The device can amplify two related inputs with the same amplifier family, helping maintain channel consistency and reducing PCB area. Transimpedance-oriented circuitry may be useful in sensor interfaces, but the exact input common-mode range, bias current, noise density, and output-current capability must be compared with the sensor and converter. Do not treat it as a universal precision amplifier without verifying those limits.
Được đề xuất
Industrial Control and Monitoring
The AD8002ARM is suitable for compact industrial monitoring modules that process two related analog signals at moderate bandwidth. The low-power dual configuration can reduce component count in a control board, while high-speed amplification supports monitoring paths that must respond quickly. Industrial use requires careful grounding, filtering, and separation from switching nodes because the amplifier itself does not eliminate EMI or common-mode interference. Verify operating-temperature requirements, supply tolerance, ESD strategy, and load behavior for the specific industrial enclosure and source impedance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD8002ARM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Analog Devices |
| Package | 8-pin MSOP |
| Number of Channels | 2 channels |
| Amplifier Architecture | Current feedback |
| Manufacturer Design Supply | ±5 V |
| Listed Supply Range | ±3 V to ±6 V |
| Listed Maximum Total Supply | 12 V |
| Transimpedance Linearization | Yes |
| Power Class | Low power |
| Shipping Format | Tube |
Bảo phân biệt quan trọng
- Two high-speed channels in a compact 8-pin MSOP (vsAD811JRZ)
- Purpose-built transimpedance linearization (vsAD812ARZ)
- Compact dual-channel implementation (vsSingle-amplifier alternatives)
Ghi chú thiết kế
Place the power-supply decoupling capacitors immediately across the AD8002ARM supply and ground pins. Keep each amplifier's feedback resistor and compensation network close to its corresponding device pins, and minimize the trace area of high-impedance feedback nodes. Maintain a continuous ground reference beneath the device and route return currents away from sensitive input traces. The compact 8-pin MSOP footprint requires careful fanout so that both channels retain symmetrical propagation delay.
Do not assume that current-feedback amplifiers behave like voltage-feedback amplifiers when setting gain. The closed-loop bandwidth, gain, feedback resistor, and capacitive loading interact, so validate the selected feedback network at the required signal bandwidth. When driving a capacitive or long-cable load, evaluate an output isolation resistor and verify stability with the actual load. Also confirm the complete ordering code before mixing tube and tape-and-reel parts.
Confirm supply voltage, polarity, output swing, and input common-mode limits against the AD8002 manufacturer datasheet. Use separate local decoupling for each supply rail if the configuration uses split supplies, and connect the ground reference properly even when the circuit operates from a single positive rail. Keep switching-regulator routing and magnetic components away from the amplifier inputs to prevent high-speed noise from entering the feedback network.
Use the manufacturer package drawing to create the land pattern and identify the exposed or reserved pins before release. Place bulk and local supply capacitors on the same side of the PCB when possible and use short, low-inductance connections. For dual-channel systems, route both channels symmetrically and avoid sharing narrow return paths beneath one amplifier. This reduces channel-to-channel timing differences and helps maintain predictable behavior in high-speed video and communications paths.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this MPN in the associated product information. Confirm the current manufacturer product declaration or material documentation before environmental-compliance use.