AD976AANZ - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD976AANZ ✓ Hoạt độngAD976AANZ Tóm tắt
An ADC is an integrated circuit that converts an analog input voltage into a numeric representation for processing, measurement, or control. The successive-approximation ADC category compares the input voltage with an internally generated reference through a sequence of conversion decisions. Within the broader semiconductor hierarchy, the AD976AANZ is an ADC, an interface IC, and a data-acquisition component designed for precision signal measurement.
Key features include 16-bit resolution, a 200 kSPS maximum throughput rate, single 5 V operation, one analog input, and a parallel output interface. The AD976A family uses a switched-capacitor architecture and a proprietary BiCMOS process combining bipolar and CMOS technologies. According to Analog Devices product information, each converter includes an ADC core, reference, and on-chip clock, reducing the number of external timing and reference components required for a complete conversion channel.
Factory calibration and production testing support consistent offset, gain, linearity, signal-to-noise ratio, and total harmonic distortion performance. The parallel interface exposes the converted digital result across dedicated output lines rather than relying on a serial protocol. This architecture simplifies connection to parallel processors, digital logic, and acquisition systems while avoiding the serial-clock and data-framing overhead of serial-output converters.
Typical uses include industrial process measurement, instrumentation, waveform capture, data-acquisition systems, communications equipment, and embedded control applications. The 200 kSPS rate is suitable for continuous monitoring of moderately changing analog signals, while 16-bit resolution provides 65,536 digital codes across the selected analog input range.
Designers should account for the single 5 V supply, reference accuracy, source impedance, acquisition time, input range, and digital timing before layout. Use the pin-description and timing information in the Analog Devices datasheet to assign tracks and connect decoupling, input-conditioning, and data-bus networks.
This product page consolidates the verified AD976AANZ specifications, package information, sourcing guidance, replacement analysis, and practical integration considerations into an engineering-focused reference that extends beyond a basic distributor listing.
Bộ thay thế dễ dàng lắp đặt cho AD976AANZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD976AANZ (cùng hình factor và footprint) — khác nhau ở Package, Architecture, Factory Calibration, Mounting Type, On-Chip Clock.
AD976AAN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD976AANZ Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bit |
| Throughput Rate | 200 kSPS |
| Architecture | Successive approximation (SAR) |
| Analog Input Count | 1 input |
| Điện áp cung cấp | 5 V |
| Supply Configuration | Single supply |
| Digital Interface | Parallel |
| Process Technology | BiCMOS |
| Internal Conversion Circuit | Switched-capillator architecture |
| On-Chip Reference | Yes |
| On-Chip Clock | Yes |
| Factory Calibration | Yes |
| Factory Testing | Fully tested for SNR and THD |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 28-pin PDIP |
| Kiểu lắp đặt | Through-hole |
Hướng dẫn cấu hình chân AD976AANZ 28-pin pdip
Cấu hình chân cho AD976AANZ (28-pin pdip gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD976AANZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD976AANZ phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Parallel Data-Acquisition Systems, Precision Instrumentation, Waveform Monitoring, Communications Signal Monitoring, Embedded Control and Monitoring.
Industrial Process Measurement
The AD976AANZ fits industrial process-measurement channels that need 16-bit quantization, a 200 kSPS sampling capability, and a parallel acquisition interface. Its single 5 V supply simplifies power partitioning around analog instrumentation, while the on-chip reference and clock reduce external timing-support requirements. Place the converter behind an input amplifier, protection network, and low-pass filter, then capture the parallel output with suitable digital logic. Because the converter uses a successive-approximation architecture, the input must settle during acquisition before conversion begins. The 65,536-code output space supports detailed monitoring of sensor signals, although system accuracy will also depend on reference quality, analog front-end noise, grounding, calibration, and the stability of the excitation source.
Được đề xuất
Parallel Data-Acquisition Systems
The AD976AANZ is suitable for data-acquisition systems whose back-end can accept a parallel 16-bit result directly from the converter. At up to 200 kSPS, the device can provide continuous samples without the serial framing required by many newer converters. Its 28-pin PDIP package also offers through-hole assembly for modular or hand-constructed acquisition boards. The implementation must account for acquisition and conversion timing, output settling, bus direction control, and synchronization between the converter clock and receiving logic. Place short, impedance-controlled routes between the converter and digital capture circuitry, provide local supply and reference decoupling, and avoid routing sensitive analog-input traces beneath switching nodes or digital clock signals.
Được đề xuất
Precision Instrumentation
The AD976AANZ can serve precision instrumentation front ends that require a 16-bit conversion result and moderate-speed sampling from a single 5 V rail. Its on-chip reference and clock support a more compact implementation than a converter requiring separate reference and timing components, while the parallel interface allows results to be processed by digital logic without a serial transceiver. Instrumentation designs should still account for analog input bandwidth, source impedance, settling time, and the noise contribution of the external front end. The -40°C to +85°C listed operating range is appropriate for many industrial environments, but the complete instrument must also satisfy its own enclosure, calibration, isolation, and electromagnetic-interference requirements.
Được đề xuất
Waveform Monitoring
The AD976AANZ fits waveform-monitoring systems that need repeated, synchronized samples at up to 200 kSPS without using a serial output protocol. A 16-bit result preserves fine signal detail across the selected input range, making the converter useful for monitoring analog conditions in test equipment, industrial diagnostics, or embedded control loops. The switched-capacitor SAR architecture requires adequate acquisition time for the analog input to settle between conversions. Designers should establish the signal bandwidth, sampling rate, anti-alias filter, input range, and system clocking before fixing the PCB layout. Synchronous capture logic must respect converter timing, and any reference or supply disturbance at the conversion frequency should be filtered to prevent modulation of the measured waveform.
Được đề xuất
Communications Signal Monitoring
The AD976AANZ may be used in communications equipment for monitoring or digitizing analog control, envelope, or supervisory signals. Its 200 kSPS rate and 16-bit resolution are well matched to many supervisory and baseband measurement tasks that do not require the throughput of a high-speed waveform ADC. The single 5 V supply is convenient for compact line-card or embedded electronics, while the parallel output can connect directly to an FPGA, microcontroller interface, or dedicated capture logic. Signal integrity depends on keeping the analog path short and controlled, providing stable reference and supply bypassing, and separating converter clock and digital-output transitions from high-impedance input nodes. Bandwidth and aliasing should be defined before selecting input filtering.
Được đề xuất
Embedded Control and Monitoring
The AD976AANZ is applicable in embedded control systems that periodically digitize analog feedback and require more than an 8-bit measurement channel. Its 16-bit resolution provides 65,536 possible digital codes, while 200 kSPS permits relatively fast sampling for supervisory loops and condition monitoring. The parallel interface requires enough controller I/O or an external latch to capture each result, so system partitioning is important when using a microcontroller with limited pins. The single 5 V operating rail simplifies power design, and the -40°C to +85°C range covers many industrial embedded products. Firmware should define conversion timing, overflow handling, scaling, and calibration, while the PCB should preserve a quiet reference node and route the analog input away from switching current paths.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD976AANZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD976AAN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 28-pin PDIP | 28-pin PDIP |
| Resolution | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 200 kSPS |
| Architecture | Successive approximation (SAR) | Successive approximation (SAR) |
| Supply Voltage | 5 V single supply | 5 V single supply |
| Digital Interface | Parallel | Parallel |
| Analog Inputs | 1 input | 1 input |
| On-Chip Reference | Yes | Yes |
| On-Chip Clock | Yes | Yes |
Bảo phân biệt quan trọng
- Exact same-family conversion performance (vsAD976AAN)
- Parallel interface preserves acquisition-rate headroom (vsAD976AAN)
- Integrated reference and clock simplify channel design (vsAD976AAN)
Ghi chú thiết kế
Route the analog input directly to the converter through a short, guarded trace and place the source-impedance and anti-aliasing network close to the device. Keep the digital output and clock traces away from the input and reference nodes to limit conversion-dependent coupling. Place supply and reference-decoupling components next to their associated pins, with the ground return arranged to minimize the area of high-current switching loops.
Allow the analog source sufficient time to settle before each conversion. The switched-capacitor SAR architecture charges an internal sampling network, so source impedance and acquisition time jointly determine whether the input reaches the required accuracy before conversion begins. Use the manufacturer acquisition-time specification with the external source resistance, and validate the complete front end with a known low-noise input rather than relying only on nominal converter resolution.
Do not assume that a 16-bit ADC produces 16 bits of usable system accuracy. Overall resolution is limited by analog-front-end noise, reference stability, grounding, layout, excitation quality, and calibration. Verify the input range against the reference configuration, confirm timing for the parallel output, and test the converter across operating temperature. Incorrect reference wiring or insufficient source impedance can also reduce dynamic performance even when digital readings appear correct.
Thông tin tuân thủ
The AD976AANZ product information confirms the -40°C to +85°C operating range and identifies a 28-pin PDIP package, but it does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.