AD9814KR - 14-Bit 10 MSPS CCD/CIS Processor | Analog Devices
MPN: AD9814KR ✓ Hoạt độngAD9814KR Tóm tắt
A CCD/CIS signal processor is an imaging IC that conditions the relatively small analog charges produced by image sensors before conversion. This device combines the sensor interface, correlated double sampling, programmable gain, offset control, and ADC functions in one package. Within the broader signal-chain hierarchy, it sits between the CCD or CIS image sensor and the digital image-processing electronics, simplifying the analog front end.
The AD9814 supports 14-bit conversion at 10 MSPS, with no missing codes guaranteed. It provides three-channel operation at 10 MSPS and one-channel operation at 7 MSPS. Each channel offers programmable gain from 1× to 6× and a programmable offset range of ±300 mV. A 300 mV input clamp helps limit signal excursions before downstream processing.
The integrated architecture reduces the number of separate analog and conversion functions needed for a multi-channel imaging system. Correlated double sampling extracts the difference between reference and signal levels, which can suppress reset noise and fixed-pattern effects in charge-coupled imaging systems. The offset DAC allows channel-level calibration, while the programmable gain amplifier adapts the signal to the useful span of the ADC.
Typical applications include three-color line-scan imaging, monochrome CCD imaging, scientific scanners, industrial optical inspection, document scanning, and other CCD- or CIS-based systems. In a line-scan camera, parallel sensor outputs can be routed into the three processing channels and converted into byte-wide digital data for image processing or storage.
Designers should account for sensor output levels, sampling timing, input-clamp behavior, and required offset calibration when establishing the analog signal path. The manufacturer identifies low power dissipation and programmable sleep or power-down operation as additional features. Correct clocking and serial-interface timing are essential for preserving the relationship between sampled image data and the source sensor line.
This product page consolidates the functional characteristics, packaging information, application guidance, and replacement analysis for engineers evaluating the AD9814KR. The comparison and design guidance emphasize functional integration, conversion performance, channel configuration, and PCB implementation rather than presenting the component only as a generic ADC.
Bộ thay thế dễ dàng lắp đặt cho AD9814KR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếAD9814KR Tỷ lệ tối đa & tính chất điện
| Product Type | 3-channel CCD/CIS analog signal processor with embedded ADC |
| ADC Resolution | 14 bit |
| Maximum ADC Sampling Rate | 10 MSPS |
| Number of Channels | 3 channels |
| Three-Channel Operation | Up to 10 MSPS |
| Single-Channel Operation | Up to 7 MSPS |
| Programmable Gain Range | 1× to 6× |
| Programmable Offset Range | ±300 mV |
| Input Clamp Level | 300 mV |
| Missing Codes | No missing codes guaranteed |
| Data Output Format | Byte-wide |
| Serial Interface | Programmable serial interface |
| Power-Down Mode | Programmable sleep/powerdown mode |
| Hộp | 28-pin PDSO (SOIC-28) |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân AD9814KR 28-pin pdso (soic-28)
Cấu hình chân cho AD9814KR (28-pin pdso (soic-28) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD9814KR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD9814KR phù hợp cho 6 Áp dụngs: Three-Color Line-Scan Imaging, Monochrome CCD Camera, Scientific Line Scanner, Industrial Optical Inspection, Document and Contact Image Scanning, Low-Power Imaging Module.
Three-Color Line-Scan Imaging
The AD9814KR fits a parallel RGB line-scan camera because its three channels can operate simultaneously at up to 10 MSPS, matching the sampling needs of separate red, green, and blue sensor outputs. Each channel integrates a correlated double sampler, programmable gain from 1× to 6×, programmable offset of ±300 mV, and a 300 mV input clamp. This allows three analog sensor lines to be conditioned and digitized before byte-wide data is transferred to downstream image processing. The main design consideration is clock and data timing: the master clock, serial interface, channel multiplexing, and sensor line cadence must be coordinated so that each output word represents the intended optical position.
Được đề xuất
Monochrome CCD Camera
The AD9814KR can condition a monochrome CCD output while using the unused processing channels for auxiliary sensor paths or factory calibration. Its embedded 14-bit ADC operates to 10 MSPS with three channels and to 7 MSPS in one-channel mode. Correlated double sampling helps isolate the image-related charge from the CCD reference level, while programmable gain and offset allow the analog input to occupy a useful portion of the converter range. For a single fast sensor, compare the 7 MSPS one-channel rating against the actual pixel clock and line timing before finalizing the configuration.
Được đề xuất
Scientific Line Scanner
The AD9814KR is suitable for scientific line scanners that acquire multiple detector channels at a controlled sampling rate. Its three-channel architecture supports parallel detector outputs, while the 14-bit ADC and selectable 1× to 6× gain improve utilization of the available conversion range. The programmable offset DAC supports channel-by-channel calibration, and the 300 mV input clamp protects the processing path from excessive signal excursions. System design should still verify sensor saturation, clock jitter, input bandwidth, grounding, and synchronization with the mechanical scan to prevent sampling errors from being interpreted as image nonuniformity.
Được đề xuất
Industrial Optical Inspection
The AD9814KR can serve as the imaging front end in industrial optical inspection equipment where a CCD or CIS sensor must produce repeatable digital samples for defect detection. Its integrated clamp, correlated double sampler, offset DAC, gain stage, and 14-bit converter reduce the number of separate conditioning components in the signal path. The three-channel capability also permits simultaneous processing of multiple inspection views or sensor taps. System integrators should prioritize stable sensor timing, low-noise routing between the CCD outputs and analog inputs, and calibration routines that use the programmable offset and gain controls to compensate channel-to-channel variation.
Được đề xuất
Document and Contact Image Scanning
The AD9814KR supports line-scanning architectures used in document imaging and contact-image-sensor products. A three-channel implementation can process separate optical paths or multiple sensor outputs concurrently, while the embedded 14-bit ADC provides sufficient resolution for illumination-controlled grayscale or color acquisition. Programmable gain and ±300 mV offset allow the analog operating point to be adjusted for different lamp intensities, sensor sensitivities, and production tolerances. The programmable sleep or power-down mode can reduce system activity when scanning pauses, but control sequencing must preserve the sensor and converter clocks needed for a valid next frame.
Được đề xuất
Low-Power Imaging Module
The AD9814KR can support portable or intermittently operated imaging modules because it combines the CCD/CIS interface functions and ADC in one device and includes a programmable sleep or power-down mode. Consolidation reduces the number of active signal-chain blocks that would otherwise require separate control and supporting circuitry. The manufacturer also identifies low power dissipation as a product feature. In a portable design, however, verify the exact supply-voltage range, active and sleep current, and wake-up behavior from the manufacturer datasheet, then confirm that the sensor clock and serial interface can resume without producing invalid samples.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD9814KR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| ADC Resolution | 14 bit |
| Maximum Sampling Rate | 10 MSPS |
| Channel Count | 3 channels |
| Three-Channel Operation | Up to 10 MSPS |
| Single-Channel Operation | Up to 7 MSPS |
| Programmable Gain | 1× to 6× |
| Programmable Offset | ±300 mV |
| Input Clamp | 300 mV |
| Package | 28-pin PDSO (SOIC-28) |
| Brand | Analog Devices |
Ghi chú thiết kế
Route CCD or CIS outputs directly to the corresponding analog inputs with short, symmetrical traces and a continuous ground reference. Keep the analog signal path away from the serial clock and byte-wide data outputs to reduce coupling. Place associated bypass and decoupling components close to their device pins, and use a quiet analog ground strategy that prevents switching and digital return currents from crossing the image-signal paths.
Establish the clocking scheme from the manufacturer timing diagrams before routing the serial interface. Account for setup and hold requirements, output timing, channel multiplexing, and the relationship between the sampling clock and CCD line cadence. A stable pixel clock and controlled data timing are especially important because timing variation can appear as horizontal displacement, duplicate samples, or fixed-pattern noise in reconstructed images.
Do not select the device solely from its 10 MSPS headline rate. Three-channel operation is rated to 10 MSPS, whereas one-channel operation is rated to 7 MSPS. Also verify that sensor output amplitude, clamp limits, gain range, offset range, and ADC input range remain compatible in the operating configuration. Programming gain or offset beyond the usable sensor range can move the signal toward the clamp or saturation regions.
Assign each supply rail and ground pin according to the pin-description table and manufacturer recommended schematic. Check the maximum input voltage, quiescent current, active power dissipation, and power-down behavior before finalizing the power tree. The manufacturer identifies low power dissipation and programmable sleep operation, but the actual system benefit depends on sensor duty cycle, converter clocking, and how quickly the imaging pipeline must resume after wake-up.
Use the correlated double sampler, offset DAC, and programmable gain controls as a coordinated calibration system rather than independent compensation values. First establish the CCD reference level, then adjust offset for channel balance, and finally set gain to maximize use of the ADC range. Record calibration settings per sensor and illumination condition so production adjustments remain traceable and do not conceal clipping caused by incorrect analog setup.
Thông tin tuân thủ
The manufacturer product page and package listing do not state the requested compliance status. AEC-Q100 is not applicable because the product is an imaging signal processor rather than an automotive-qualified device.