AD9848KST - 10-Bit 20 MHz CCD Signal Processor | Analog Devices
MPN: AD9848KST ✓ Hoạt độngAD9848KST Tóm tắt
A CCD signal processor is an image-sensing IC that conditions the analog charge signal produced by a CCD array, converts it into digital data, and coordinates the sensor's transfer and reset timing. Within the imaging signal chain, the AD9848KST sits between the CCD output circuitry and the downstream image-processing electronics. Its integrated timing driver reduces the number of separate control components required by the imaging subsystem.
The AD9848KST provides a 10-bit conversion path capable of operating at 20 MHz. Its analog front end includes a correlated double sampler, a pixel-gain amplifier with a stated gain of 10 dB, and a 10-bit variable-gain amplifier. A black-level clamp is also included to help establish a stable signal reference before digital conversion. These functions are intended to support CCD signals in digital still-camera applications.
The 48-lead PQFP package provides 48 terminals at a stated 0.5 mm pitch. Public product information describes a package width of 7 mm and an operating temperature range from -20°C to 85°C. Because this is a mixed-signal device, the analog and timing sections require careful partitioning on the printed circuit board to reduce coupling between the CCD input path, digital outputs, and timing-control signals.
Typical uses include compact digital cameras, CCD-based imaging modules, industrial vision equipment, and surveillance cameras. In these systems, the AD9848KST can combine correlated double sampling, analog gain adjustment, black-level correction, 10-bit digitization, and programmable timing generation in one package. The AD9849 is a related 12-bit, 30 MHz device, but its different converter resolution and processing speed mean that it should not be selected automatically as a functional equivalent.
A key design consideration is the relationship between CCD clocking and analog-signal timing. Power sequencing, clock-signal integrity, grounding, and decoupling must be coordinated with the imaging-array requirements. The manufacturer's AD9848/AD9849 data sheet and its pin-description table should be used directly when assigning traces, setting gain, programming timing registers, and calculating the appropriate bypass network.
This product page combines the manufacturer specifications, observed distributor pricing, package characteristics, and application guidance needed to evaluate the AD9848KST. It also distinguishes the 10-bit, 20 MHz AD9848 from the 12-bit, 30 MHz AD9849 and identifies where an engineering review is required before treating a related part as a replacement.
Bộ thay thế dễ dàng lắp đặt cho AD9848KST — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD9848KST (cùng hình factor và footprint) — khác nhau ở ADC Resolution, Package.
AD9849KST
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →AD9848KST Tỷ lệ tối đa & tính chất điện
| ADC Resolution | 10 bit |
| Maximum Conversion Rate | 20 MHz |
| Product Type | CCD signal processor with integrated timing driver |
| Analog Front End | Correlated double sampler plus 10 dB pixel-gain amplifier |
| Pixel-Gain Amplifier Gain | 10 dB |
| Variable-Gain Amplifier Resolution | 10 bit |
| Black-Level Clamp | Included |
| Timing Driver | Integrated and programmable |
| Hộp | 48-lead PQFP |
| Terminal Count | 48 terminals |
| Package Width | 7 mm |
| Terminal Pitch | 0.5 mm |
| Khoảng nhiệt độ hoạt động | -20°C to 85°C |
| Kiểu lắp đặt | Surface mount |
| Target Application | Digital still-camera CCD imaging |
Hướng dẫn cấu hình chân AD9848KST 7 mm
Cấu hình chân cho AD9848KST (7 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD9848KST.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD9848KST phù hợp cho 6 Áp dụngs: Digital Still Camera, Industrial Vision Camera, Security Surveillance Camera, CCD Imaging Module, Scientific CCD Camera, Machine Vision Camera.
Digital Still Camera
The AD9848KST fits a CCD digital still camera because it combines 10-bit, 20 MHz conversion with correlated double sampling, a 10 dB pixel-gain amplifier, a 10-bit variable-gain amplifier, a black-level clamp, and programmable timing generation. Placing these functions in one 48-lead PQFP reduces the need for separate CCD conditioning and timing circuits. The design should still be validated against the imager's clock limits, output amplitude, settling requirements, and the camera's exposure-control system.
Được đề xuất
Industrial Vision Camera
For industrial vision, the AD9848KST provides a compact analog-to-digital front end for CCD-based measurement and inspection cameras. Its correlated double sampler helps extract the charge information from the CCD, while the pixel-gain and variable-gain stages allow controlled amplification before the 10-bit, 20 MHz conversion stage. A working design must account for industrial temperature changes, vibration-sensitive interconnect, and clock jitter that can affect repeatability.
Được đề xuất
Security Surveillance Camera
The AD9848KST is suitable for compact CCD surveillance-camera signal chains where integration, timing generation, and analog conditioning are important. The 10-bit, 20 MHz converter handles the CCD output while the integrated timing driver coordinates sensor transfers and resets. For continuous-duty surveillance equipment, use the specified -20°C to 85°C range, provide stable bypassing, and validate the regulator and clocking system under worst-case enclosure temperatures.
Được đề xuất
CCD Imaging Module
A compact CCD imaging module can use the AD9848KST to consolidate the front-end functions normally distributed across multiple discrete components. Correlated double sampling, black-level clamping, programmable gain, 10-bit digitization, and timing control are integrated within the 48-lead PQFP. This supports space-constrained modules, although the 0.5 mm package pitch demands careful assembly planning and the timing-driver outputs require clean routing back to the CCD array.
Được đề xuất
Scientific CCD Camera
The AD9848KST can serve as the CCD signal-processing path in scientific and laboratory imaging systems that use a 10-bit, 20 MHz interface. Its black-level clamp and adjustable gain stages support repeatable conversion of CCD charge into digital data, while the integrated timing driver reduces external sequencing complexity. Overall image quality will still depend on sensor noise, optical integration time, power-supply cleanliness, and correct timing calibration.
Được đề xuất
Machine Vision Camera
For machine-vision cameras, the AD9848KST offers a deterministic CCD front end with a 10-bit converter operating at up to 20 MHz. Correlated double sampling and programmable gain are useful for standardizing signals before image processing, while integrated timing generation simplifies sensor control. Confirm frame-rate requirements, exposure behavior, and trigger latency; applications needing greater resolution or throughput should evaluate the 12-bit, 30 MHz AD9849 family member instead.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD9848KST — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD9849KST |
|---|---|---|
| Package | 48-lead PQFP | 48-lead PQFP |
| Brand | Analog Devices | Analog Devices |
| ADC Resolution | 10 bit | 12 bit |
| Maximum Conversion Rate | 20 MHz | 30 MHz |
| Product Type | CCD signal processor with integrated timing driver | CCD signal processor with integrated timing driver |
| Correlated Double Sampler | Included | Included |
| Black-Level Clamp | Included | Included |
| Target Application | Digital still-camera CCD imaging | Digital still-camera CCD imaging |
Bảo phân biệt quan trọng
- Lower converter resolution matched to 20 MHz CCD designs (vsAD9849KST)
- Purpose-built 10-bit CCD signal-processing channel (vsAD9849KST)
- Verified compact package characteristics (vsAD9849KST)
Ghi chú thiết kế
Keep the CCD input and correlated-double-sampling path short and isolate it from the digital timing outputs and clock-return currents. Route the analog signal toward the sensitive input pins before transitioning to digital signals, maintain a continuous ground reference under the device, and place bypassing close to the relevant supply pins. Clock and timing traces should be controlled-impedance routes where the CCD interface requires predictable edge timing.
Use stable, low-noise supply rails for the analog and digital sections. Place the smallest high-frequency bypass capacitor directly at each supply pin and add bulk capacitance near the device according to the manufacturer recommendation. Validate startup sequencing because the CCD, converter, and timing-driver sections must receive valid operating conditions in the required order.
Pay particular attention to CCD clock amplitude, rise time, jitter, and return paths because timing errors can appear as image noise or geometry distortion. Confirm that the programmed horizontal and vertical timing values match the CCD array's limits, and use a scope measurement at the sensor interface to verify clock levels after losses through connectors and PCB traces.
Do not treat the AD9849KST as an automatic substitution merely because both devices use a 48-lead PQFP. The AD9849KST changes from 10-bit, 20 MHz conversion to 12-bit, 30 MHz conversion, which can affect timing, data-interface implementation, system power, and downstream processing. Confirm the complete pin description, clock limits, and functional requirements before any replacement is approved.
Thông tin tuân thủ
The available product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.