AD9891KBC - 20 MSPS 10-Bit CCD Signal Processor | Analog Devices
MPN: AD9891KBC ✓ Hoạt độngAD9891KBC Tóm tắt
A CCD signal processor is an integrated circuit used between a charge-coupled device and an imaging system. It conditions the small analog pixel signal, performs correlated double sampling and gain adjustment, converts the conditioned signal to digital data, and generates the clocking required to transfer and reset CCD pixels. In the broader hierarchy, it belongs to the ADC/DAC class of interface and conversion ICs used in professional imaging systems.
The AD9891KBC supports operation to 20 MSPS and includes a complete on-chip timing generator. According to the Analog Devices product page, its Precision Timing core adjusts high-speed clocks with 1 ns resolution at 20 MHz operation and 700 ps resolution at 30 MHz operation. The 6 dB Pixel Gain Amplifier provides fixed gain before the 10-bit VGA, while the 10-bit VGA allows downstream gain adjustment for different signal levels.
The integrated architecture reduces the number of discrete components required in a CCD imaging channel. Correlated double sampling rejects much of the reset and charge-transfer noise present in CCD outputs. Pixel gain and variable gain are both available, allowing calibration to be distributed between two stages. The black-level clamp with variable-level control establishes a stable reference for digitizing weak or offset signals.
Typical uses include digital still cameras, scanned imaging, machine vision, scientific instrumentation, and professional camera systems. The AD9891KBC is particularly relevant where compactness, repeatable timing, integrated clock generation, and direct conversion of CCD analog outputs are more important than a modular analog signal chain.
PCB design should preserve controlled clock and analog-signal routing because the device combines sensitive analog input, high-speed digital conversion, and timing outputs. Place the bypass and decoupling capacitors close to their associated supply pins, follow the manufacturer’s recommended land pattern, and route the CCD signal and timing connections with short return paths to minimize coupling and timing disturbance.
This product summary combines the manufacturer’s architecture information with package, feature, sourcing, and replacement guidance. It also highlights where the AD9891KBC fits in a CCD imaging design and identifies the technical checks that matter when comparing it with a replacement.
Bộ thay thế dễ dàng lắp đặt cho AD9891KBC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếAD9891KBC Tỷ lệ tối đa & tính chất điện
| Product Type | CCD signal processor with precision timing generator |
| Maximum Processing Rate | 20 MSPS |
| ADC Resolution | 10 bit |
| ADC Conversion Rate | 20 MHz |
| Pixel Gain Amplifier Gain | 6 dB |
| Variable Gain Amplifier Resolution | 10 bit |
| Correlated Double Sampler | 20 MSPS |
| Timing Resolution at 20 MHz | 1 ns |
| Timing Resolution at 30 MHz | 700 ps |
| Black-Level Clamp | Variable level control |
| Timing Generator | Complete on-chip programmable timing generator |
| Logic Input Type | Logic input |
| Logic Output Type | Logic output |
| Hộp | 64-CSPBGA (9 x 9 mm) |
| Kiểu lắp đặt | Surface mount |
| Application | Digital still camera CCD imaging |
Hướng dẫn cấu hình chân AD9891KBC 64-cspbga (9 x 9 mm)
Cấu hình chân cho AD9891KBC (64-cspbga (9 x 9 mm) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD9891KBC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD9891KBC phù hợp cho 6 Áp dụngs: Digital Still Camera Imaging, Professional Camera Signal Conditioning, Machine Vision Camera, Scientific CCD Instrument, Scanned Imaging System, High-Speed Surveillance Camera.
Digital Still Camera Imaging
The AD9891KBC fits directly between a CCD output and a digital still camera imaging pipeline because it combines the functions normally distributed across several analog and timing blocks. Its 20 MSPS correlated double sampler, 6 dB Pixel Gain Amplifier, and 10-bit VGA provide a controlled path from weak CCD pixel signals to the 10-bit converter. The integrated timing generator supports deterministic transfer, reset, and sampling sequences, while the variable black-level clamp establishes a stable ADC reference. This combination reduces external circuitry and keeps CCD timing close to the conversion electronics.
Được đề xuất
Professional Camera Signal Conditioning
The AD9891KBC is suited to professional camera designs that need predictable CCD sampling and adjustable gain without a large collection of external analog components. The 10-bit VGA permits signal-level adjustment after the fixed 6 dB pixel-gain stage, allowing the imaging chain to accommodate changes in scene brightness or sensor operating conditions. Correlated double sampling helps reject fixed-pattern noise associated with CCD reset and transfer. Its 20 MSPS conversion rate supports high-rate imaging while the integrated timing generator reduces synchronization complexity across the sensor interface.
Được đề xuất
Machine Vision Camera
A machine vision camera can use the AD9891KBC to create a compact, repeatable analog front end for a CCD sensor. The correlated double sampler operates at 20 MSPS, while the 6 dB Pixel Gain Amplifier and 10-bit VGA provide two-stage gain control for matching the sensor output to the converter. The black-level clamp with variable-level control is useful when consistent black offsets are required for pixel calibration. Integrated timing generation also reduces the number of independent clock domains that must be coordinated within a high-speed camera module.
Được đề xuất
Scientific CCD Instrument
The AD9891KBC can support scientific and industrial CCD instruments that require deterministic timing and programmable analog conditioning close to the sensor. Its 1 ns timing adjustment resolution at 20 MHz operation allows the transfer and reset sequence to be aligned with the conversion process, while the 10-bit VGA permits gain calibration across different signal levels. Integrating the sampler, gain controls, converter, black-level clamp, and timing generator simplifies the analog topology. Board-level implementation still requires careful analog grounding and clock isolation to preserve conversion performance.
Được đề xuất
Scanned Imaging System
The AD9891KBC is applicable to scanned imaging systems that use CCD line sensors or imaging arrays and require synchronized sampling. Its complete on-chip timing generator supplies programmable control for fast clock sequences, while the 20 MSPS correlated double sampler and 10-bit converter form a direct path from the sensor output to digital processing. The 6 dB pixel-gain stage and 10-bit variable gain amplifier allow the analog signal to be adjusted without moving the conversion function to a separate board. Placement close to the CCD can shorten the sensitive input path and reduce susceptibility to interference.
Được đề xuất
High-Speed Surveillance Camera
The AD9891KBC can serve in surveillance camera electronics built around CCD sensors, where compact timing and signal-conditioning functions are valuable. A 20 MSPS sampling capability supports rapid pixel acquisition, and the integrated black-level clamp assists with maintaining a stable baseline when illumination varies. The two-stage gain arrangement provides initial pixel gain followed by programmable 10-bit VGA adjustment. For a surveillance module, designers should preserve the analog path around the device, isolate the CCD clock signals from sensitive inputs, and observe the specified decoupling and layout recommendations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD9891KBC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Manufacturer | Analog Devices |
| Package | 64-CSPBGA (9 x 9 mm) |
| Product Type | CCD signal processor with precision timing generator |
| Maximum Processing Rate | 20 MSPS |
| ADC Resolution | 10 bit |
| ADC Conversion Rate | 20 MHz |
| Pixel Gain Amplifier Gain | 6 dB |
| Variable Gain Amplifier Resolution | 10 bit |
| Timing Resolution at 20 MHz | 1 ns |
| Timing Resolution at 30 MHz | 700 ps |
| Integrated Functions | CDS, Pixel Gain Amplifier, VGA, ADC, black-level clamp, and timing generator |
| Primary Application | Digital still camera CCD imaging |
Ghi chú thiết kế
Follow the manufacturer’s 64-CSPBGA land pattern and place the required bypass capacitors directly beside their associated supply balls. The AD9891KBC combines a sensitive CCD input, 20 MHz conversion circuitry, and high-speed timing signals in one package. Short supply loops, solid ground-plane continuity, and separation between analog input and clock routes reduce potential coupling. Treat the exposed or central BGA connections according to the package drawing and recommended PCB stack-up rather than inferring connectivity from package dimensions alone.
Preserve a short, controlled route from the CCD output to the analog input and keep the timing signals away from that input path. The 6 dB pixel-gain stage and 10-bit VGA provide adjustable analog gain, but external routing noise can still affect black level and conversion accuracy. Use the manufacturer’s recommended source and termination arrangements, maintain ground continuity beneath the signal path, and verify the assembled board with an appropriate CCD timing pattern before production.
Do not replace the AD9891KBC with the related AD9895 solely because both are CCD signal processors. Their resolution, operating specifications, timing behavior, and ball assignments can differ even though the manufacturer presents them together. A valid substitution must match the 64-CSPBGA footprint and every electrical, timing, control, and signal-integrity requirement. Review the exact pin table and application circuit before authorizing a replacement in a production imaging design.
Thông tin tuân thủ
The product is a CCD signal processor intended for digital imaging rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established by the cited product information.