ADM2209EARU - Dual RS-232 Interface | Analog Devices
MPN: ADM2209EARU ✓ Hoạt độngADM2209EARU Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic levels. In the broader semiconductor hierarchy, the ADM2209EARU belongs to the RS-232 transceiver class, within interface ICs and communication semiconductors. Its combination of multiple drivers and receivers makes it useful where more than one serial channel must share a compact board area.
The principal features of the ADM2209EARU are its six transmit drivers, ten receive inputs, dual-port integration, and onboard negative-rail converter. The device is designed for EIA-232 and V.28 operation according to the Analog Devices product description. Integrating the DC-to-DC converter reduces the external power-supply component count compared with an RS-232 implementation that requires both positive and negative supply rails.
The ADM2209EARU combines three driver channels and five receiver channels per RS-232 port, producing a 6/10 transceiver configuration in a single 38-pin TSSOP. This channel density can simplify designs that require multiple serial interfaces for instrumentation, data acquisition, industrial control, or legacy peripheral connectivity. The converter also removes the need to distribute a system-generated negative voltage to the transceiver.
Typical uses include dual-port data acquisition equipment, industrial serial interfaces, test and measurement instruments, and embedded systems that must communicate with legacy RS-232 peripherals. When using the device in a long or noisy cable environment, the board should still include the protection and signal-conditioning components recommended for the application rather than treating the interface IC as a complete surge-protection solution.
PCB implementation requires careful assignment of the 38-pin TSSOP footprint and compliance with the Analog Devices pin-description table. Keep transceiver traces away from sensitive analog paths, connect the required supply bypassing close to the device, and provide adequate return paths for each interface channel. The integrated converter reduces external power complexity but does not eliminate the need for correct decoupling and layout discipline.
This page combines the official Analog Devices product description, distributor identification of the exact ADM2209EARU package and configuration, and practical guidance for evaluating the device against closely related RS-232 interface options. The ADM2209EARUZ is the lead-free packaging designation associated with the same ADM2209E device family and is identified separately for sourcing comparisons.
Bộ thay thế dễ dàng lắp đặt cho ADM2209EARU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ADM2209EARUZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADM2209EARU Thông số kỹ thuật
| Product Type | Dual-port RS-232 transceiver |
| RS-232 Ports | 2 ports |
| Number of Drivers | 6 drivers |
| Number of Receivers | 10 receivers |
| Compliance Standard | EIA-232 and V.28 specifications |
| Negative Rail Generation | On-board DC-to-DC converter generates a -12 V power rail |
| External Negative Supply | Not required |
| Hộp | 38-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Logic Family | RS-232 |
| Interface Classification | 6/10 transceiver |
Hướng dẫn cấu hình chân ADM2209EARU 38-pin tssop
Cấu hình chân cho ADM2209EARU (38-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADM2209EARU.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADM2209EARU phù hợp cho 6 Áp dụngs: Dual-Port Data Acquisition, Industrial Serial Control, Test and Measurement Instrumentation, Legacy Peripheral Connectivity, Communication Port Concentrator, Multi-Port Control Panel.
Dual-Port Data Acquisition
The ADM2209EARU is appropriate for data acquisition equipment that must connect two RS-232 instruments or peripheral groups through one interface IC. Its six drivers and ten receivers divide into two ports, each containing three transmit channels and five receive channels, reducing the number of separate transceiver packages required on the controller board. The onboard DC-to-DC converter generates the -12 V rail internally, eliminating the need for a system negative supply dedicated to the serial interface. This consolidation can simplify power distribution and shorten inter-device routing, although exposed cable inputs should receive the protection specified for the installation.
Được đề xuất
Industrial Serial Control
The ADM2209EARU fits industrial serial-control systems that require more than one legacy RS-232 connection on a compact controller. Six driver outputs and ten receiver inputs support two RS-232 ports without requiring two separate multi-channel interface packages. The integrated -12 V DC-to-DC converter is particularly useful where the controller power tree supplies only positive rails. Designers should preserve the EIA-232 and V.28 interface intent, route each cable-side signal away from sensitive circuitry, and add suitable surge protection when the equipment connects to external industrial cabling.
Được đề xuất
Test and Measurement Instrumentation
Test and measurement instruments can use the ADM2209EARU to combine two RS-232-facing ports on one 38-pin TSSOP. The 6/10 channel arrangement allows several outputs and inputs to be assigned within each port, which is useful when an instrument must control one peripheral while receiving status from another. Because the device includes a converter for the required negative RS-232 rail, the instrument does not need to generate that voltage separately. Keep connector protection and grounding independent of the transceiver pins so that cable transients do not bypass the external protection network.
Được đề xuất
Legacy Peripheral Connectivity
The ADM2209EARU is suitable for embedded equipment that must preserve compatibility with legacy RS-232 peripherals while adding another serial port. Two complete ports share one package, reducing component count compared with two separate transceiver circuits. Its integrated DC-to-DC converter produces the negative rail required by RS-232 drivers, allowing the system to operate from positive supply rails without adding a discrete charge pump at the board level. Firmware and hardware should still account for the different receiver and driver counts when allocating connector pins and implementing handshake or flow-control signals.
Được đề xuất
Communication Port Concentrator
A port concentrator can use the ADM2209EARU to provide two RS-232 ports while centralizing line-driver and receiver circuitry in one 38-pin TSSOP. The six-driver and ten-receiver arrangement supports multiple serial functions within each port and can replace several discrete interface channels on a crowded controller board. The internal -12 V generator simplifies the power architecture by eliminating a separate negative-supply branch for the RS-232 circuits. A production design should confirm connector pin assignments, grounding strategy, and cable-side protection using the manufacturer datasheet and application guidance.
Được đề xuất
Multi-Port Control Panel
The ADM2209EARU can serve control panels that communicate with multiple RS-232-managed subsystems through two grouped ports. Three driver channels and five receiver channels per port provide enough connection density for command, status, and peripheral-control functions when the exact signal map is designed appropriately. The integrated converter avoids a separate negative supply for RS-232 level generation, reducing board complexity. Because the device is a transceiver rather than a complete surge-protection solution, every exposed RS-232 connector should retain suitable transient protection and chassis-ground handling.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADM2209EARU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADM2209EARUZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 38-pin TSSOP | 38-pin TSSOP |
| RS-232 Ports | 2 ports | 2 ports |
| Driver Count | 6 drivers | 6 drivers |
| Receiver Count | 10 receivers | 10 receivers |
| Negative Rail | On-board DC-to-DC converter generates a -12 V rail | On-board DC-to-DC converter generates a -12 V rail |
| Interface Standards | EIA-232 and V.28 specifications | EIA-232 and V.28 specifications |
| Transceiver Configuration | 6/10 transceiver | 6/10 transceiver |
| Termination | Non-Z ordering suffix | Lead-free Z termination |
Bảo phân biệt quan trọng
- Consolidates two RS-232 ports and ten logic channels into one package (vsADM2209EARUZ)
- Eliminates the need for an external negative RS-232 supply rail (vsADM2209EARUZ)
- Matches EIA-232 and V.28 interface requirements (vsADM2209EARUZ)
Ghi chú thiết kế
Use the 38-pin TSSOP footprint and assign every function from the Analog Devices pin-description table. The ADM2209EARU is a dual-port interface with multiple driver and receiver signals, so do not infer a simple one-transceiver-per-port pin pattern. Place the device away from connector and surge-protection components, then route cable-side signals to the IC only after the protection network.
The onboard DC-to-DC converter eliminates an external -12 V source, but the device still requires its specified positive supply and local bypassing. Connect the recommended decoupling capacitors close to their associated supply and ground pins, and keep return-current paths compact. Do not assume that the internal converter permits operation without the supply bypassing called out in the manufacturer documentation.
Do not treat the ADM2209EARU as a complete RS-232 protection solution. Long cables and exposed connectors can introduce surge or ESD transients that exceed the transceiver's operating limits. Use appropriately selected external protection, maintain the intended grounding arrangement, and keep high-energy transient paths away from the converter, logic traces, and sensitive system ground connections.
Group each port's transmitter, receiver, and return connections according to the manufacturer's recommended layout. Avoid sharing narrow return paths between cable-side transients and internal circuitry. Where the two RS-232 ports cross other domains on the PCB, maintain controlled spacing and prevent either interface's cable currents from flowing through sensitive analog or processor ground paths.
Thông tin tuân thủ
The ADM2209EARUZ lead-free packaging designation is identified by the ordering code, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declaration for the exact target MPN was identified. AEC-Q100 qualification is not applicable to this interface IC.